All Products

SKU: SF-BOB-16446

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. We've already attached headers to this version of the board so you d...

SKU: EC-DTS04512B

This prototype expansion board breaks out all of the BBC micro:bit's edge connector pins to labelled headers and includes a small breadboard for building circuits. It provides a beginner-friendly way to learn electronics and programming with the micro:bit, making it easy to connect sensors, LEDs,...

SKU: SF-BOB-16998 · MPN: BOB-16998

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board breaks out the USB-C connector’s VBUS, GND, CC1, CC2, D+ and D- pins to 0.1" pit...

SKU: SF-LCD-13722 · MPN: LCD-13722

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for useful graphics, status screens and simple game interfaces.It is easy to drive f...

SKU: SF-LCD-22495 · MPN: LCD-22495

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...

SKU: WS-14513

An edge connector expansion board for the BBC micro:bit that breaks out all I/O pins to standard 2.54mm pitch pin headers for easy breadboard and jumper wire connections. Key Features Full Pin Breakout – All micro:bit I/O pins broken out to 2.54mm headers Edge Connector – Simply slide in the ...

SKU: SF-BOB-12035

Add a Micro-B USB connector to your project without the hassle of soldering tiny SMD pads. This compact breakout board routes all five pins — VCC, GND, ID, D−, and D+ — to a standard 0.1" pitch header for easy breadboard or through-hole connection. Specifications Connector – Micro-B USB Pins ...

SKU: SF-SEN-22397

The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope with intelligent on-chip motion detection features optimised for wearable applicati...

SKU: SF-BOB-09719

A breadboard-friendly breakout board for the Analog Devices AD5330 8-bit parallel digital-to-analogue converter (DAC). All necessary pins are broken out to 2.54 mm (0.1″) spaced headers. The board includes a decoupling capacitor but no voltage regulation — supply voltage must be within the specif...

SKU: SF-BOB-12700

This simple breakout board routes a female USB Type-A connector's VCC, GND, D−, and D+ pins to a standard 0.1″ pitch header. It saves you the hassle of soldering tiny SMD connectors when adding USB host or device connectivity to your project. Key Features Female USB Type-A Connector – Accepts ...

SKU: SF-BOB-09966

A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregulated). Key Features All 5 Pins Broken Out – VCC, D-, D+, ID, and GND Breadb...

SKU: LB-LS0823

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:bit’s edge connector allows intermediate and advanced users to connect the micro:...

SKU: SF-SEN-15335

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely low-power sensor supporting both I2C and SPI communication, suited for wearable...

SKU: SF-BOB-00495

A simple breakout PCB that adapts a 20-pin SOIC package IC to standard 0.1″ DIP headers for easy breadboard prototyping. Solder your SOIC chip to the board and plug it straight into a breadboard or socket. Key Features SOIC to DIP Conversion – Use surface-mount ICs on breadboards 20-Pin Layou...

SKU: SF-BOB-13282

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding. Several of these breakouts can even be chained together to form a display or an addres...

SKU: SF-DEV-13664

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an o...

SKU: LB-LS0824

The IO:bit is a compact expansion board for micro:bit that breaks out all I/O pins to standard headers while adding a built-in miniature buzzer. It features Lego-compatible mounting holes for integration with KittenBot and other building projects. Key Features Plug and Play – Edge connector fo...

SKU: SF-BOB-11722

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version! Simply solder an encoder down to the board and you’r...

SKU: SF-BOB-10124

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount o...

SKU: EF-EF03415

The sensor:bit is a breakout board for the BBC micro:bit that extends all available I/O ports into standard GVS (Ground-Voltage-Signal) pin headers. This makes it easy to connect 3 V electronic modules like LEDs, photocells, servos, and other sensors without a breadboard. The board also features ...