All Products

SKU: AF-4011

An electronic snow globe kit that combines a Circuit Playground Express with a clear, durable plastic globe. Programme light and sound effects using MakeCode's drag-and-drop block editor — no soldering or coding experience required. Fill the globe with water, glitter, and glycerine for a working ...

SKU: AF-3722

Not merely a snow globe, but a show globe! This custom container is durable, clear and round, with a large flat screw-on top and a press-fit rubber stopper. The stopper makes a nice seal, and is also hollow which means you can put (you guessed it...) electronics inside! This makes it perfect f...

SKU: RS-272-7631

The MakeKit Snow:bit is a propeller-driven sled robot kit designed to work with the BBC micro:bit. Built from laser-cut birch veneer, it features dual motors that push air backwards to propel the sled forward on skis — reaching speeds of up to 40 km/h. A hands-on STEAM project that combines woodw...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: EF-EF03419

The snowflake buzzer is a symbol of Christmas day's snow. The snowflake buzzer is just like snow, comes in this Christmas night and play the Christmas music.This picture is just for a design sketch , the product includes only snowflake. The Christmas tree, the micro:bit and Alligator cables (Blac...

SKU: AF-5431

A pack of five handcrafted, sphere-shaped green LEDs from dLUX-dLITE by Unexpected Labs. Each LED features a semi-diffused 9.9 mm globe that adds a unique decorative touch to PCBs, electronics projects, and art installations. Because they are handmade, every LED is slightly different in appearanc...

SKU: DF-DFR0439

These LED string lights are composed of a series of LEDs that have a colorful glow. They can be used as decorations and for other interesting applications. Use them as outdoor string lights, string lights in your bedroom, on your patio or on a globe. There are many applications, what can yo...

SKU: PH-MMP-0594

Following a successful campaign on IndieGoGo SnowPi the GPIO Snowman for Raspberry Pi is now available! Ideal as a Stocking filler this christmas SnowPi the GPIO Snowman is an ideal kit for people new to Raspberry Pi or even the experienced users. Snow Pi comes as a to solder kit and is target...

SKU: TB-SL2658

Standard MES globe holder. - Suits SL-2654/6 globes Specifications Plug or Socket Type MES Pack Quantity 1pc Contacts / Pins 2pc ...

SKU: AF-2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-5791

The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can deliver approximately 13 Vpp — much louder than driving a piezo directly from a 3V...

SKU: AF-2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...

SKU: AF-1063

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully assembled and tested with a 20–20 kHz electret microphone soldered on. A trimmer p...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-5077

A two-piece silicone mould set for casting your own custom keycaps. Includes four 1U (standard single-key size) and one 1.25U (Tab-key size) cavities, compatible with Cherry MX-style key switches. UV-curable resin is recommended for the best results — it cures quickly and cleanly with a UV lamp,...

SKU: SF-BOB-12758

The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up voice, claps, knocks, or ambient noise — the amplified signal is ready to read ...

SKU: TB-ZL3348

The LM348 is a quad operational amplifier IC containing four independent 741-type op-amps in a single 14-pin DIP package. It's a versatile, general-purpose op-amp suitable for a wide range of analogue circuit applications. Specifications IC Type: Quad 741 operational amplifier Number of Op-Am...

SKU: SF-BOB-09816

This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the...

SKU: AF-5647

The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...

SKU: DF-TEL0108

This Bluetooth audio receiver module supports wireless streaming, USB flash drive, and TF (microSD) card playback. It decodes MP3, WMA, WAV, and lossless FLAC audio formats, with a built-in pre-amp output capable of driving headphones or a small 3 W speaker directly. Powered by 5 V DC via Micro-...