All Products

SKU: SF-DEV-14643

The Raspberry Pi 3 Model B+ is a credit-card-sized single-board computer powered by a 64-bit quad-core ARM Cortex-A53 processor running at 1.4 GHz. Features dual-band Wi-Fi, Bluetooth 4.2/BLE, gigabit Ethernet (via USB 2.0), and Power over Ethernet (PoE) support with an optional HAT. Capable of ...

SKU: AF-3847

A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable board and get clean DC power on the other side — no separate power cable needed. ...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: PI-CAM008

Light up the night with this night vision camera module with infra-red LEDs, for Raspberry Pi! Available with ether a standard (70°) or a wide-angle (160°) lens, this camera has IR LEDs that allow the camera to see in the dark without producing visible light. The camera itsel...

SKU: DF-DFR0327

The Gravity Arduino Shield for Raspberry Pi brings Arduino-compatible I/O to your Raspberry Pi B+, 2B, 3B, 3B+, or 4B. Built around the ATmega32u4 (Arduino Leonardo), it sits on top of your Pi and gives you access to all standard Arduino shields and sensors alongside the Pi's own GPIO, I2C, SPI, ...

SKU: AF-2718

The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects! The 800x480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi...

SKU: AF-2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, di...

SKU: SF-DEV-15139

The Raspberry Pi 3 Model A+ is a compact, cost-effective single-board computer featuring the same 64-bit quad-core Broadcom BCM2837B0 processor as the Raspberry Pi 3 B+, running at 1.4 GHz. It includes dual-band Wi-Fi (2.4 GHz and 5 GHz) and Bluetooth 4.2/BLE in a smaller form factor. Compared t...

SKU: AF-3114

Have you always wanted to binge-watch Battlestar Galactica on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building ...

SKU: AF-2250

An orange polycarbonate case base for the Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+. The snap-together design lets you mix and match coloured lids and bases for custom combinations. This listing is for the base only — lids are available separately. Made from durable, glossy po...

SKU: PR-PIM377

Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts into the slots on Breakout Garden and get started coding and creating. It's ideal for prototyping projects without the need ...

SKU: PR-PIM345

Support and protect your PiTFT+ and Raspberry Pi with this stylish and unique case! Features Compatible with Raspberry Pi 3 B+, 3, & 2, but not with the original model B or B+ Custom top layers provided for both the 2.8" 320x240 and the 3.5" 480x320 PiTFT+ variants Protects your beloved ...

SKU: AF-4855

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to stack another HAT underneath. Specifications Configuration – 2×2 (4-pin) fem...

SKU: RP-SC0073 · MPN: SC0073

The Raspberry Pi 3 Model B+ is a credit-card-sized single-board computer powered by a 1.4 GHz quad-core ARM Cortex-A53 processor with 1GB RAM. Add a keyboard, mouse, display, power supply, and a microSD card with your chosen Linux distribution and you have a fully functional desktop computer, med...

SKU: AF-3055

Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry Pi Foundation are continuously making their flagship board better.  Still, w...

SKU: AF-3775

The Raspberry Pi 3 Model B is the most popular Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 3 better? How about a faster processor, 5 GHz WiFi, and updated Ethernet chip with PoE capability? Good guess - that's...

SKU: RP-SC0054 · MPN: SC0054

The Raspberry Pi TV HAT is a DVB-T2 Digital TV receiver add on for the Raspberry Pi, compatible with the  Raspberry Pi 3 Model B+  or Raspberry Pi Zero W  (and older Raspberry Pi 2 & 3 models)The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems whi...

SKU: DF-FIT0417

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The grooved bottom design provides easy access for GPIO ribbon cables. Key Features ...

SKU: SF-CAB-13028

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you room to work with breadboards, breakout boards, and HATs. The cable uses standard ...