All Products

SKU: SF-PRT-17912

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces o...

SKU: AF-4885

The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor family, it delivers excellent measurement precision in a compact, easy-to-use breakou...

SKU: SF-KIT-19518

The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA standby current, making it ideal for battery-powered motion-sensing application...

SKU: AF-5665

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membrane, making it suitable for clean indoor environments where dust and water prote...

SKU: AF-5776

The Adafruit Sensirion SHT41 is a high-accuracy temperature and humidity sensor with a true I2C interface, part of Sensirion's fourth-generation SHT4x family. Compared to the SHT40, the SHT41 offers significantly better accuracy across the full humidity range — ±2% typical over 0–100% RH versus t...

SKU: AF-4646

The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on a single die with an ARM Cortex-M0 processor that handles all fusion calcula...

SKU: AF-5649

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit) run at 3.3 V, but some sensors and modules still need 5 V — this board bridges...

SKU: AF-5637

The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecting them directly to a 5 V board risks damage. This breakout handles the voltage ...

SKU: AF-3967

The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, it measures how long light takes to bounce back for accurate, reliable distance ...

SKU: AF-5146

The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist through power cycles and firmware updates — without the page-write constraints o...

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: AF-5425

The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long light takes to bounce back, delivering accurate distance readings without the linea...

SKU: SF-LCD-29530 · MPN: LCD-29530

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and data plotting.The display uses Chip-on-Glass (COG) OLED technology, so each pixe...

SKU: SF-KIT-15081

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and ...

SKU: SF-SEN-18020

The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO we've created this small breakout board just for you! Each LSM6DSO breakout has...

SKU: SF-SEN-20844

The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The independent hotplate control allows the detection of volatile organic compounds ...

SKU: AF-6403 · MPN: ADA6403

This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a probe, and it can also report its own local on-chip temperature.The fitted MLX90632S...

SKU: AF-5811 · MPN: ADA5811

This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy choice when you want finer output control than a typical 12-bit DAC can provide....

SKU: SF-SEN-19037

The SparkFun Qwiic dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter (TDC)...

SKU: SF-SEN-19218

The SparkFun Qwiic Mini dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter ...