All Products

SKU: MR-CB-KT-MAX-1

The Maximum Cubelet is a "Think" block in the Cubelets robot construction system. It accepts multiple input values and passes along only the greatest one, acting as a filter for sensor data. Use it to build robots that respond only when a sensor exceeds a threshold — for example, pairing it with ...

SKU: AF-4829

The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensirion's VOC algorithm to produce an overall air quality index from 0 to 500 — rathe...

SKU: SF-WIG-18013 · MPN: WIG-18013

This partly assembled temperature monitor and logger module is designed for reading multiple PT100 temperature probes and sending the measured values out over a serial port for data logging or further processing.Up to six 3-wire PT100 sensors can be connected, letting you monitor as many as six t...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: DF-DFR1093-868 · MPN: DFR1093-868

Build a private LoRaWAN network for EU868 regions with local processing, dashboarding and automation built in. This indoor gateway combines a Semtech SX1302 8-channel LoRaWAN concentrator with a quad-core Cortex-A35 processor, making it suitable for collecting data from multiple long-range sensor...

SKU: AF-5606

The Adafruit ENS160 is a fully integrated metal-oxide (MOX) gas sensor from ScioSense, designed as a drop-in upgrade for the now-discontinued CCS811. It combines multiple MOX sensing and heating elements on a single chip to provide detailed air quality readings including TVOC (Total Volatile Orga...

SKU: SF-BOB-13099

The SparkFun Rotary Switch Potentiometer Breakout is a small board the allows you to add resistors to a 10-position rotary switch, turning it into a potentiometer with 10 discrete steps. Multiple applications require potentiometers that are hard to find due to specific resistance values or cus...

SKU: AF-3709

The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated output signals and I2C interfacing, it provides a straightforward way to detect ...

SKU: AF-1455

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED control, this board delivers smooth, flicker-free dimming across all channels. ...

SKU: AF-4162

The Adafruit VEML7700 is a high-accuracy ambient light sensor from Vishay that outputs calibrated lux values over I2C. Unlike basic light sensors that return unitless brightness readings, the VEML7700 calculates lux (an SI unit), giving you consistent and comparable measurements across multiple s...

SKU: AF-5914 · MPN: ADA5914

The Adafruit LTC4316 I2C Address Translator solves one of I2C's most frustrating limitations: address conflicts. When two devices share the same fixed I2C address, this chip performs on-the-fly address translation — devices on the output side appear at a different address to the controller on the...

SKU: SF-SEN-29260 · MPN: SEN-29260

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and Sensirion CMOSens® technology for repeatable, stable readings.The board also inc...