All Products

SKU: AF-196 · MPN: 196

The Proto-ScrewShield is a dual-purpose Arduino prototyping shield that combines a large through-hole prototyping area with screw terminal breakouts for every Arduino pin. Instead of soldering wires directly, you get sturdy, reliable screw terminals — making it easy to connect and disconnect exte...

SKU: AF-2077 · MPN: 2077

The Adafruit Proto Shield for Arduino (R3) is a versatile prototyping shield with a 0.1" grid, power rails, indicator LEDs, and stacking headers — everything you need to build custom circuits on top of your Arduino. Version R3 is compatible with virtually all Arduino boards including UNO, Mega, L...

SKU: AF-462 · MPN: 462

Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without a computer — program blank chips up to 10× faster with audio feedback from the b...

SKU: AF-85 · MPN: 85

“How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question.  The person who invented the wheel’s answer, we were told, was something like “well it’s not actually that simple - i...

SKU: AF-1411 · MPN: 1411

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...

SKU: M5-K023

The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, and humidity — making it ideal for air quality monitoring deployments. The PMSA00...

SKU: DF-FIT0008-R

A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Arduino Proto Shield. Key Features 170 Tie Points – 17 × 5 × 2 point layout Sel...

SKU: SF-DEV-08321

The PICAXE 8 Pin Proto Kit is a beginner-friendly kit for getting started with 8-pin PICAXE microcontrollers. It includes a handful of easy-to-solder through-hole components and a proto board, making it an ideal first project for learning microcontroller basics. The kit includes a battery snap f...

SKU: DF-FIT0008

This compact 170-point mini breadboard is ideal for small prototyping tasks and fits neatly onto Arduino proto shields, enclosures, or project bases thanks to its strong self-adhesive backing. The solderless tie points accept standard jumper wires and component leads for quick circuit assembly. ...

SKU: DF-DFR0409

INTRODUCTION  The Arduino Proto shield allows an Arduino board to communicate wireless using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of...

SKU: DF-FIT0008-BE

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices for different colors. SPECIFICATIONS 170 tie point breadboard 17 x 5 x 2 points Adhes...

SKU: AF-4253 · MPN: 4253

The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and ground. Each of...

SKU: AF-3061 · MPN: 3061

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...

SKU: PR-PIM688

A high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices. The Do-Everything Board 🦾 Yukon is a standalone controller that can be equipped with up to six interchangeable modules capable of driving high-powe...

SKU: AF-3010 · MPN: 3010

The Feather M0 WiFi pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module for reliable 802.11b/g/n connectivity. The ATWINC1500 handles all Wi-Fi networking on a dedicated chip, freeing the main processor for your application code without the need to yield or share CPU ti...

SKU: AF-3403 · MPN: 3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-3417 · MPN: 3417

The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power distribution. Additional proto holes are available for custom wiring. Comes as a ...

SKU: AF-2890 · MPN: 2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards si...

SKU: AF-2203 · MPN: 2203

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 16 pin 0.3" wide version. Best used with chips that have 16 pins (2x8) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto ...

SKU: AF-2204 · MPN: 2204

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 20 pin 0.3" wide version. Best used with chips that have 20 pins (2x10) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto...