All Products

SKU: AF-1789 · MPN: 1789

This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: AF-1831 · MPN: 1831

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poi...

SKU: EF-EF04061

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightness, speed, or any other parameter in your project. Features a standard 3-pin con...

SKU: AF-3395 · MPN: 3395

This Panel Mount Right Angle 10K Linear Potentiometer w/ On-Off Switch is a two-in-one, with both a breadboard-friendly potentiometer and a switch. For the potentiometer-half, you've got a standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not s...

SKU: SF-SEN-08679

A thin, flexible membrane potentiometer that senses finger or stylus position along a 200 mm strip. Pressing anywhere on the strip varies resistance linearly from 100 Ω to 10 kΩ, providing accurate positional data for user interfaces, sliders, and control inputs. The connector uses 2.54 mm (0.1"...

SKU: AF-562 · MPN: 562

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: SF-SEN-08681

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC hea...

SKU: AF-3393 · MPN: 3393

A dual-ganged 10K linear potentiometer with a built-in on/off switch — two components in one convenient panel-mount package. The dual 10 kΩ linear-taper pots share a grippy shaft that turns smoothly without shifting on its own, and the on/off switch activates at the beginning of the shaft's rotat...

SKU: AF-3391 · MPN: 3391

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-points, so you can p...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: AF-5281 · MPN: 5281

An Alpha 5K linear potentiometer with right-angle PC mount pins spaced at 0.2" — perfect for plugging directly into a breadboard or perfboard during prototyping. When you're ready for a permanent build, mount it to a panel using the included washer and hex nut. Key Features 5K Ohm Linear Taper...

SKU: AF-4133 · MPN: 4133

A compact 10K ohm linear potentiometer with a built-in knurled plastic knob — no separate knob needed. The 0.1" pin spacing plugs directly into a standard breadboard, making it perfect for prototyping and quick adjustments. Larger than a trim-pot but smaller than a full-size panel-mount potentio...

SKU: AF-4271 · MPN: 4271

This 35 mm slide potentiometer offers a compact, linear input control for your projects. Use it as a voltage divider where the slider position gives you a visual indication of the output level — perfect for mixing boards, LED brightness controls, and interactive prototypes. The 10 kΩ linear tape...

SKU: AF-4219

This 75mm slide potentiometer is a linear 10KΩ pot with a smooth, satisfying action and an included grippy plastic knob with a white position marker. Use it as a voltage divider, input control, or anywhere you need a visual, tactile slider interface. The three solder legs are compatible with bre...

SKU: SF-PRT-27313 · MPN: PRT-27313

This wiper/plunger is Spectra Symbol's recommended actuator for use with linear and rotary SoftPots, ThinPots and especially HotPots.It provides a controlled contact force for actuating compatible potentiometer sensors. While these sensors can operate with multiple contact methods, this wiper/plu...

SKU: AF-2046 · MPN: 2046

Oh say can you see By the knob's early light... Sorry - we thought that was clever.  And while it wasn't really, this potentiometer knob definitely is.  It's a 'soft touch' T18 knob that works great with our Panel Mount 10K, Panel Mount 1K, and Panel Mount 100K potentiomet...

SKU: DF-FIT0423

INTRODUCTION Introducing "The Breadboard-Plugin Kit" - the first kit in the ECell series. The Breadboard-Plugin Kit provides a range of common components such as resistors, capacitors, diodes, transistors etc. that are compatible with a solderless breadboard. This...

SKU: AF-2048 · MPN: 2048

Oh say can you see By the knob's early light... Sorry - we thought that was clever.  And while it wasn't really, this potentiometer knob definitely is.  It's a 'soft touch' T18 knob that works great with our Panel Mount 10K, Panel Mount 1K, and Panel Mount 100K potentiomet...

SKU: AF-2047 · MPN: 2047

A soft-touch T18 potentiometer knob in white with a rubbery grip for comfortable, precise adjustment. Features a white indicator line on the outside for clear position visibility. Designed to press-fit directly onto T18 splined potentiometer shafts for a secure connection. Compatible with standa...

SKU: SF-COM-09288

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on...