All Products

SKU: LB-00312

A hands-on guide to building electronic circuits, robots, and cloud-connected devices using littleBits — the snap-together magnetic electronic building blocks. Co-authored by littleBits founder Ayah Bdeir and top-selling author Matt Richardson (Getting Started with Raspberry Pi). With over 60 mo...

SKU: LI-650-0132

The littleBits Mix module combines two audio inputs into a single output, with independent volume controls for each channel. It's an essential module for creating layered sounds, mixing oscillators, or blending multiple audio sources in your littleBits synth projects. Part of the littleBits modu...

SKU: LI-650-0022

The littleBits Temperature Sensor responds to the ambient temperature surrounding its probe, sending a stronger signal as the temperature increases. It's a simple way to add temperature sensing to your littleBits circuits. The sensor uses an I²C temperature IC on the top of the board, communicat...

SKU: LI-660-0005

The littleBits Mounting Boards let you keep your circuit intact and move it around with ease. Simply snap together your littleBits circuit and press the module feet into the holes of the mounting board. Boards come 2 to a pack. Key Features Secure Hold – Hold your circuit upside down, vertical...

SKU: LI-650-0010

ARDUINOYou can now easily incorporate programming into your littleBits circuits! It’s everything you know and love about Arduino without the breadboarding, soldering or wiring. Simply plug into your computer, snap together needed modules, and program away! You focus on the code, we'll cover the e...

SKU: LW-LB-650-0151-00A1

The littleBits Bluetooth Low Energy Bit (marked "BLE" on your Bit) is the easiest way to control your inventions wirelessly, from any smart device (like a phone or tablet). All you need is the littleBits Invent app and this Bit to move motors on wireless vehicles, or trigger buzzers for pranks...

SKU: LI-650-0086

The LittleBits NAND module is a logic gate with two inputs. It outputs an "on" signal unless both inputs are receiving "on" — the exact opposite of an AND gate. Snap it into any LittleBits circuit to introduce Boolean logic concepts through hands-on experimentation. How It Works Both inputs off...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: LB-PT91049-3PIN

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with three 0.1" spaced contact pogo pins and a right angle solderable connection to your PCB. If you've...

SKU: LB-LR0046

The 5V 1-Channel Optocoupler Relay Module provides safe, isolated switching of high-voltage loads from a microcontroller. An onboard SMD optocoupler isolates the control circuit from the relay, protecting your Arduino, Raspberry Pi, or other development board from voltage spikes. A jumper settin...

SKU: LI-650-0063

SHORT DESCRIPTIONThe USB power may be the smallest in the series, but it's big enough to send juice to all your creations. Connect a USB cable (included) to your computer or phone charger to start the power flowing. Try it with an LED to make the simplest littleBits circuit. If you're looking for...

SKU: WS-19750

A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...

SKU: LB-LR0002

The 5V 1-Channel Relay Board Module provides a simple way to switch high-voltage loads from your Arduino, Raspberry Pi, or other microcontroller project. Controlled via a 5–12V TTL signal, this relay can switch loads up to 250V AC, making it suitable for controlling lights, fans, pumps, and other...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: AF-5359

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with five 0.1" spaced contact pogo pins and a right angle solderable connection to your PCB. If you've eve...

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: LI-650-0072

BRANCHThe Branch Bit gives you more options for connecting your Bits: it lets you connect the output of a single Bit to as many as three others, oriented in different directions. Use it when you want to trigger light, sound and motion at the same time.    

SKU: LI-650-0044

SHORT DESCRIPTIONThe bright LED (or "Light-Emitting Diode") is a small module that puts out a big light. Just like our other LED modules, it's a great way to shed some light on your creations. Choose the bright LED when you want a LOT of bright white light.GEEK SPEAKThe bright LED features a half...

SKU: AF-5358

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with four 0.1" spaced contact pogo pins and a right angle solderable connection to your PCB. If you've eve...