All Products
Showing 1-20 of 53 products · 7 unavailable products hidden
.jpg)
Gravity LoRaWAN Node Module EU868 - SX1262
·
This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency band for Europe and other regions that use this band.The module can work in LoRa ...
DFRobot Gravity LoRaWAN Node Module US915 (SX1262)
·
This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa communication and LoRaWAN networking.It can be used for point-to-point links or...
ThinkNode G3-Single Channel LoRaWAN Gateway ESP32-S3 Chip
ThinkNode G3 is a high-performance, compact LoRaWAN gateway designed for IoT communications by Elecrow. It uses the ESP32-S3 dual-core processor and Semtech SX1262 transceiver, equipped with a 240MHz dual-core main control, integrated Bluetooth, WiFi and optional 4G modules(Not yet released), an...
DFRobot LoRaWAN Gateway with SIoT & Node-RED - EU868
·
Build a private LoRaWAN network for EU868 regions with local processing, dashboarding and automation built in. This indoor gateway combines a Semtech SX1302 8-channel LoRaWAN concentrator with a quad-core Cortex-A35 processor, making it suitable for collecting data from multiple long-range sensor...
SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN, EU868 Band
The Pico-LoRa-SX1262-868M is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily. Standard Raspberry Pi Pico heade...
DFRobot DFR1120-868 LoRaWAN Control Terminal - EU868, RS485, 4km
·
Build remote monitoring and control systems around a single DIN-rail RTU for EU868 LoRaWAN networks. This 868MHz control terminal is designed for industrial IoT, smart agriculture, building automation and environmental monitoring where long-range wireless telemetry and local device control are ne...
SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN, 915Mhz
SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing prob...
DFRobot DFR1195 ESP32-S3 LoRaWAN Dev Board with Display
·
This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Meshtastic mesh networking.The board is designed to be approachable for makers and de...
Elecrow ThinkNode M1 - LoRa Meshtastic Transceiver with 1.54" EPD Screen, GPS & nRF52840 (915MHz)
·
ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enables secure, decentralised communication without any internet or cellular infrast...
Gravity: Digital Wireless Switch Kit - Transmit and Receive (433MHz)
This Gravity wireless switch kit provides simple 433 MHz RF communication between a transmitter and receiver module. Based on digital signal transmission, it offers strong wall penetration, ultra-low standby power consumption, and compatibility with any controller that can read and write digital ...
ThinkNode M5 Walkie-Talkie Pro- Meshtastic (LoRa) Signal Transceiver |ESP32-S3 | 1.54” Screen | GPS Function-915 MHz
The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile phones. M2 is pre-installed with Meshtastic firmware and equipped with an SX1262 wi...
CrowPanel Advance 3.5"-HMI ESP32 AI Display for Meshtastic 480x320 Artificial Intelligent IPS Touch Screen with case
The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...
IoT Node for LoRaWAN® Development Board
·
This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can c...
ThinkNode M2-Meshtastic (LoRa) Signal Communication Device with Battery
Built for off-grid messaging and device-to-device data exchange, ThinkNode M2 is a compact LoRa communication device designed for use where internet or mobile coverage may be limited.It uses an ESP32-S3 module as the main processor, supports Bluetooth setup, and comes pre-installed with Meshtasti...
LoRaWAN Control Terminal (US 915MHz, 4km Range, RS485)
·
The LoRaWAN Control Terminal is a comprehensive Industrial IoT (IIoT) node that bridges field devices with remote cloud platforms. Operating on the US 915MHz band with up to 4km range, this DIN-rail mountable controller integrates data acquisition, logic processing, and device actuation into a si...
SparkFun LoRa Thing Plus - expLoRaBLE
The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrate...
20cm Male-to-Male Cable for UNIHIKER (3Pin*2 + 4Pin*1)
·
This expansion cable kit is made for connecting Gravity-style modules directly to the UNIHIKER M10 and UNIHIKER K10 mainboards. Its plug-and-play design helps you hook up sensors, actuators and displays without needing extra expansion shields.The kit includes two 20cm PH2.0-3P male-to-male cables...
DFRobot LoRaWAN Gateway 915MHz with Local Server & Node-RED
·
Build a private LoRaWAN IoT network for home automation, environmental monitoring or maker projects without relying on an external cloud service. This indoor gateway includes a built-in SIoT local server and pre-installed Node-RED, so sensor data can be processed locally for dashboards, rules and...
ThinkNode M7 Meshtastic Wireless Communication Gateway, Support PoE Power, Powered By ESP32-S3 and LR1110
This ThinkNode M7 is a high-performance gateway based on the ESP32-S3 module and LR1110 LoRa chip, deeply adapted for the LoRa protocol. The device features an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz, providing powerful computing capabilities. It also integrates 2...
