All Products

SKU: DF-FIT0897 · MPN: FIT0897

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...

SKU: DF-FIT0773

The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont port, compatible with standard breadboard pin pitch for convenient DIY connection.Besides, the cable uses color code design to disti...

SKU: DF-FIT0902 · MPN: FIT0902

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...

SKU: DF-FIT0031

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. Each cable features a servo-type connector (Signal, GND, PWR) on one end and a 3-...

SKU: DF-FIT0756

This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and digital sensors such as vibration sensors, tilt sensors, magnetic induction, et...

SKU: DF-FIT0011

INTRODUCTION The digital sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our digital sensor to the IO board. This price includes 10 pieces of cables. SPECIFICATION ...

SKU: DF-FIT0898 · MPN: FIT0898

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker pr...

SKU: DF-FIT0896

Note: One package has 10 cables.This high-quality 30cm digital sensor cable is equipped with 3 pin PH2.0 plug connector on one side and Dupont male connector on the other side. One package has 10 cables. Compatible with breadboard and DuPont wire spacing, these cables use materials that are ...

SKU: DF-FIT0913 · MPN: FIT0913

A 10-pack of PH2.0-3P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 3-pin connectors ensure correct orientation and prevent reverse insertion. The 20cm length provides extended reach for larger setups. Key Features Polarised Con...

SKU: DF-FIT0769

This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and analog sensors such as Ambient light sensor, Gray sensor, MIC sound, etc. It con...

SKU: DF-FIT0915 · MPN: FIT0915

This pack of cables is designed for linking sensors, expansion boards and controllers in modular electronics projects. Each cable has 4-pin polarised PH2.0 male connectors on both ends, making them suitable for Boson, UNIHIKER and other PH2.0-based systems.Connector type: PH2.0 4-pin male to male...

SKU: DF-FIT0924 · MPN: FIT0924

This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...

SKU: DF-FIT0914 · MPN: FIT0914

A 10-pack of PH2.0-4P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 4-pin connectors ensure correct orientation and prevent reverse insertion. Key Features Polarised Connectors – Prevents incorrect insertion 4-Pin PH2.0 – Male ...

SKU: SF-KIT-19627

This is a 10 pack of the MyoWare® Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready, stick th...

SKU: PL-1756

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. These 12″ (30 cm) wires have blue insulation and ship in packs of 10.

SKU: SF-CAB-15186

A 10-pack of cables with an alligator clip on one end and a female header on the other. These cables bridge the gap between clip-based prototyping and standard 0.1" pin headers, making it easy to connect alligator clips directly to breadboards, development boards, and breakout modules. Key Featu...

SKU: AF-164

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm and 0.4 V at 80 cm — which can be read directly by an Arduino or other microcont...

SKU: DF-FIT0112

A pack of 10 colour-coded alligator-to-alligator clip test cables for quick, hands-free circuit connections. Each cable features strong, grippy clips on both ends and heavy-insulation copper wire — ideal for prototyping, testing, and classroom electronics projects. Key Features Alligator Clips...

SKU: AF-3399

For many years, instructors and teachers have asked us to come up with a better way to teach programming and electronics. We have worked on Circuit Playground Express for over a year to come up with a board that is powerful, beautiful, fun, and perfect for teaching Code.org CS Discoveries Circ...

SKU: DF-KIT0021

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one digital pin for communication. Multiple sensors can share the same data pin thank...