All Products

SKU: AF-1750

The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...

SKU: SF-TOL-14856 · MPN: TOL-14856

This two-pack of Carbide 3D ZrN coated flat mills is made for precise CNC machining and fabrication, especially when working with aluminium. Each cutter has a 0.25 inch cutting diameter and matching 0.25 inch shank diameter, making it a straightforward fit for compatible CNC spindles and collets....

SKU: SF-TOL-14857 · MPN: TOL-14857

This two pack of Carbide 3D flat mills is made for precision 3D machining and fabrication, especially when working with aluminium. Each cutter has a 0.125 inch cutting diameter and matching 0.125 inch shank diameter for use with compatible CNC machines and tool holders.The cutters are coated with...

SKU: DF-FIT0417

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The grooved bottom design provides easy access for GPIO ribbon cables. Key Features ...

SKU: EC-CDP03051C

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper motors for CNC routers, laser cutters, 3D printers, and other precision motion pro...

SKU: SF-TOL-19752 · MPN: TOL-19752

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router’s power switch when a program ends or a tool change is required.This V2 Deluxe version adds a lockout pendant, allowing you to manually disable the router during bit changes for additional s...

SKU: SF-TOL-25930 · MPN: TOL-25930

This clamp set is made for reliable workholding on compatible CNC and machining setups. The clamps are heavy-duty, moulded from glass-filled nylon, and designed to be quick to remove thanks to magnetic actuation.The Crush-It Essentials and Stops are reinforced with stainless steel hardware, makin...

SKU: SF-TOL-19762 · MPN: TOL-19762

The MC Etcher is a diamond drag bit for fine line engraving on composites, metals and glass. Instead of cutting with flutes like a normal endmill, it drags a diamond-coated, spring-loaded tip across the surface to create an etched or engraved pattern.Important: drag engravers are not meant to rot...

SKU: SF-TOL-18476 · MPN: TOL-18476

Sweepy 2.0 is a clear polycarbonate dust boot for CNC routing, designed to help collect chips and dust around the cutter while keeping the work area visible.This 69mm version is made for Dewalt spindles. It mounts directly to the spindle and clamps in place with a machined quick-release, with a c...

SKU: SF-TOL-18468 · MPN: TOL-18468

These low-profile stainless steel stops are designed for workholding on Nomad and Shapeoko CNC machines. Use them as hard stops to help locate and secure your job during milling.They are intended to work with Tiger Claw clamps, in either Standard or Compact versions, as well as Gator Tooth clamps...

SKU: SF-TOL-19767 · MPN: TOL-19767

These flat end mill cutters are suited to roughing operations and machining flat or prismatic parts on a compatible CNC mill.The pack includes two cutters, each with a 0.25" shank and 0.25" flute diameter. They are solid carbide tools with two flutes and no coating.If you are using these with a N...

SKU: SF-TOL-19753 · MPN: TOL-19753

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router switch at the end of each program or whenever a tool change is required.This V2 Standard version includes a lockout pendant, allowing you to manually disable the router during bit changes fo...

SKU: SF-TOL-15953 · MPN: TOL-15953

This ZrN coated single flute flat mill is made for roughing or machining flat and prismatic parts on a desktop CNC.It is a handy cutter for working with plastic and aluminium, and is a good fit for machines such as the Nomad or Shapeoko.If you are using it with a Nomad, make sure you have a compa...

SKU: LB-LR0180

Including CNC Shield V3.0The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 I...

SKU: SF-TOL-14859 · MPN: TOL-14859

This two pack of V-bit mills from Carbide 3D is made for engraving intricate patterns, fine details, and precision 3D machining jobs on a compatible CNC machine.Each cutter is made from solid carbide for long-lasting use, with a 0.5 inch cutting diameter, 0.25 inch shank, and 60º cutting angle.If...

SKU: SF-TOL-19766 · MPN: TOL-19766

These flat end mills are made for roughing and machining flat or prismatic parts on a compatible CNC mill or router.Each pack includes two cutters, giving you a spare for workshop use or a matched pair for repeat jobs. The tools use a 0.125" shank and 0.125" flute diameter, making them suitable f...

SKU: SF-TOL-18467 · MPN: TOL-18467

These Lock Stops are low-profile stainless steel hard stops for CNC workholding on Nomad and Shapeoko machines.Use them together with Tiger Claw clamps, either Standard or Compact, or Gator Tooth clamps to help secure your workpiece firmly in place.The serrated face helps provide a tight grip, ma...

SKU: SF-TOL-14854 · MPN: TOL-14854

This two pack of Carbide 3D flat mills is made for milling flat or prismatic surfaces, making it useful for specialised 3D machining and fabrication work.Each cutter has a 0.25 inch cutting diameter, a 0.25 inch shank diameter and a 0.75 inch cutting length. The cutters are made from solid carbid...

SKU: SF-TOL-19768 · MPN: TOL-19768

These V-bit cutters are made for engraving intricate patterns and fine details, especially where a sharp 90° V profile is useful. They work well with the V-carve feature in Carbide Create for sign making, decorative engraving and detailed CNC work.Each pack includes two cutters. The bits use an H...

SKU: SF-TOL-14858 · MPN: TOL-14858

This two pack of Carbide 3D V-Bit mills is made for engraving intricate patterns and fine details. With a 90° cutting angle, these cutters are well suited to precision 3D machining and fabrication work.Each cutter is made from solid carbide for long-lasting use, with a 0.5 inch cutting diameter a...