All Products

SKU: AF-2336

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These standoffs can also be screwed into each other allowing stacking multiple H...

SKU: AF-2337

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories with extra tall headers properly secured while also keeping the two boards separa...

SKU: LB-LR0309-36

A 120-piece M2.5 brass standoff kit with a mix of female-female spacers, male-female spacers, stainless steel screws, and nuts — all organised in a reusable plastic storage box. M2.5 is the standard mounting size for Raspberry Pi, many single-board computers, and PCB mounting applications. The k...

SKU: SF-PRT-29327 · MPN: PRT-29327

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extra clearance.The included tall 2x20 pin female GPIO header raises the HAT above t...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: SF-PRT-28764 · MPN: PRT-28764

This M2.5-0.45 machine screw is a small Phillips-head fastener suited to electronics assemblies, enclosures and board mounting jobs.The 8.0mm long thread is handy for Raspberry Pi pHAT standoffs and other compact hardware builds. It is made from steel with a zinc finish to DIN7985A.Sold individua...

SKU: E14-MP014889

A purpose-built enclosure for the Raspberry Pi 5 and official 10" touchscreen display, designed and manufactured in the UK. The black ABS housing integrates both the Pi and display into a clean, self-standing unit at a 33° angle — ready for touchscreen interaction straight out of the box. Precis...

SKU: PH-106462

The KKSB HAT Case is an aluminium enclosure for the Raspberry Pi 5, designed to accommodate HAT add-on boards including NVMe storage HATs. The sandblasted, black anodised finish provides a professional look while offering heat dissipation, dust protection, and physical shielding. The case featur...

SKU: AF-3299

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes (2.5mm or 0.1" drill holes). Works g...

SKU: SF-PRT-10571

These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.Documents: Datasheet

SKU: AF-3816

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your projects, enclosures, and robots. Key Features M3 Brass Standoffs – 12 mm hexago...

SKU: AF-4207

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerful soldering iron & some patience. All you have to do is put a 4.25mm hole with ...

SKU: PR-PIM408

Inky wHAT is a 4.2" e-paper display HAT for Raspberry Pi, capable of showing red, black, and white. The EPD display is crisp and readable in bright sunlight, making it perfect for information displays that don't need frequent updates. The display uses electrophoresis to pull coloured particles i...

SKU: PL-1955

A pack of 25 steel, zinc-plated pan-head Phillips machine screws in the #2-56 thread size, 6.35 mm (1/4″) long. Commonly used in robotics, electronics enclosures, and small mechanical assemblies. Specifications Thread – #2-56 UNC (≈2.18 mm diameter, 0.45 mm pitch) Length – 6.35 mm (1/4″) Hea...

SKU: AF-4206

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerful soldering iron & some patience. All you have to do is put a 4.25mm hole wi...

SKU: AF-3289

The Pimoroni Automation HAT is a versatile home automation and industrial control board for the Raspberry Pi. With relays, analogue channels, powered outputs, and buffered inputs — all 24V tolerant — it provides a comprehensive I/O platform for monitoring and controlling real-world devices. Each...

SKU: PL-1960

Steel zinc-plated pan-head Phillips machine screws, #4-40 thread, ¼" (6.35mm) long. Sold in a pack of 25. Ideal for securing PCBs, standoffs, and enclosures in electronics projects. Specifications Thread: #4-40 Length: ¼" (6.35mm) Head Type: Pan-head, Phillips drive Material: Steel, zinc-pl...

SKU: PL-1962

This #4-40, pan-head screw is 1/2″ (0.5″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: AF-1126

Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. Each card contains 24 complete snap pairs (socket and stud). Key Features 5 m...

SKU: SF-PRT-13268

A large prototyping PCB with v-scored lines that let you snap it to any custom size. The 50 × 25 solder point array provides up to 1250 plated through-hole (PTH) pins on a 2.54 mm (0.1″) pitch grid. Simply snap along the scored lines to create the exact board dimensions your project requires. Ke...