All Products

SKU: DF-DFR1140

FireBeetle 2 ESP32-UE (N16R2) is a powerful IoT microcontroller that supports external Bluetooth & WiFi antennas and features 16M Flash and 2M PSRAM. This product enhances memory capacity and operating space, enabling superior performance for applications such as the LVGL graphics library for int...

SKU: EC-WAW24031A

A 2.4 GHz WiFi antenna with 3 dBi gain, suitable for DIY wireless projects. It provides improved range over built-in PCB antennas on WiFi-enabled microcontrollers and development boards. Key Features 3.0 ± 0.7 dBi Gain – Improved signal strength over stock antennas 2400–2500 MHz Frequency Ran...

SKU: EC-WWF2232USR

This Serial WiFi module is you best choice for you to connect your application to the internet. It is a complete ultra low power embedded TCP/IP solution. It is a standalone, embedded wireless 802.11b/g networking module. It incorporates a 2.4GHz radio, processor, TCP/IP stack, power management t...

SKU: EC-WAW24040A

A 2.4 GHz WiFi antenna with 4 dBi gain and an IPEX (MHF) connector, enclosed in a protective cover. It connects directly to boards with an IPEX/U.FL socket, providing improved wireless range over built-in PCB antennas. Key Features 4 dBi Gain – Higher gain than standard stub antennas for exten...

SKU: AF-945

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...

SKU: AF-2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: AF-4172

The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a generous set of GPIO, analog, and communication peripherals, it's a powerful and affo...

SKU: WS-25452

A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module design, it's ideal for both breadboard prototyping and direct SMD soldering to c...

SKU: AF-2471

The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack with DNS, and a CE/FCC certified module with on-board antenna, it provides an a...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: SF-GPS-28962 · MPN: GPS-28962

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...

SKU: AF-3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3046

Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one'...

SKU: AF-3176

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...

SKU: SF-WRL-17381 · MPN: WRL-17381

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...

SKU: DF-FIT0677

An aluminium alloy heatsink enclosure for the LattePanda V1 single board computer. The all-metal construction with black anodised and sandblasted finish provides excellent durability and a professional appearance. The bottom-mounted aluminium heatsink module with 12mm fins provides passive coolin...

SKU: AF-5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: AF-2821

The Feather HUZZAH ESP8266 is an all-in-one Wi-Fi development board with built-in USB and battery charging. Powered by the ESP8266 with a full Wi-Fi stack, it's a compact and affordable way to add Internet connectivity to your projects using the Arduino IDE or NodeMCU Lua. The CP2104 USB-serial ...

SKU: AF-2491

The ESP-12S is a compact WiFi module based on the ESP8266 processor from Espressif. Running at 80 MHz with a full WiFi front-end (client and access point modes) and built-in TCP/IP stack with DNS support, it's designed for embedding directly into custom PCB designs. The module features large, ea...