All Products

SKU: EC-ILM13205D2-915

The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...

SKU: EC-CIL12901M-1 · MPN: CIL12901M-1

ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enables secure, decentralised communication without any internet or cellular infrast...

SKU: M5-A051

M5:bit It is an M5Core-to-Microbit serial communication converter/adapter board.The adapter board connects the Microbit Uart port to the GROVE port on M5core,which realized the function of serial communication between M5Core and Microbit.More IO pins are extended, you can used DuPont Cable t...

SKU: DF-DFR0946

A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage and maximum current independently. Specifications Input Voltage – 6–35V DC Ou...

SKU: SF-SEN-14729

A straight bar load cell (strain gauge) that translates up to 5kg of force into an electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, it measures electrical resistance changes proportional to the applied load. Use it to measure object weigh...

SKU: DF-FIT0495-G

A compact metal DC geared motor with a 45:1 reduction gearbox, delivering up to 1.2 kg·cm of torque. The all-metal gears provide durability and stability for robotics and mechanical projects. Features a D-shaped 4 mm output shaft. Specifications Rated Voltage – 6V DC Operating Voltage – 2–7.5...

SKU: PH-105480

Mount your Raspberry Pi camera case to a wall or ceiling with this adjustable bracket. The tilt and swivel mechanism lets you position your camera at just the right angle, then lock it in place with thumbscrews — ideal for building a flexible monitoring or security camera system. The bracket sup...

SKU: DF-FIT0633

Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power operation at any speed. High efficiency and strong overload capability, good re...

SKU: DF-FIT0632

Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power operation at any speed. High efficiency and strong overload capability, good...

SKU: DF-KIT0176

The Gravity I2C 1 kg Weight Sensor Kit is a complete scale-building kit that includes a load cell, HX711 signal adapter board, acrylic mounting bracket, and all hardware needed to measure weight from 1 g to 1,000 g. The on-board MCU processes HX711 data and communicates via I²C, making it compati...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: AF-1220

A 7-hole cross joining plate for connecting pieces of 20mm slotted aluminium extrusion at right angles or in cross configurations. Made from 4mm thick aluminium with 5.3mm drill holes spaced 20mm apart, compatible with M4 or M5 screws. Specifications Dimensions – 100 × 60mm Thickness – 4mm H...

SKU: TB-RL6428

A 10µF 50V low-leakage electrolytic capacitor with leakage characteristics similar to tantalum capacitors, but at a lower cost. The low leakage current makes it well suited for timing circuits, sample-and-hold applications, and other designs where minimal DC leakage is critical. Key Features L...

SKU: AF-5104

An etched glow-through keycap featuring the classic Zener ESP card "waves" symbol. Made from translucent/opaque plastic with a precision-etched design, the symbol lights up beautifully when placed over an illuminated mechanical key switch. Compatible with Cherry MX and MX-compatible switches. Th...

SKU: DF-SEN0374

BNO055 is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope, a triaxial geomagnetic sensor, and a 32-bit microcontroller.With a size of 5.2 x 3.8 x 1.1mm, the BNO0...

SKU: LB-1147

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides approximately 4.5 V with three alkaline AAA batteries (3 × 1.5 V) or 3.6 V with t...

SKU: TB-RC5324

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circuits. They're commonly used for decoupling, bypassing, and high-frequency filtering applications. Key Features 100pF, 50V DC – General-purpose cerami...

SKU: SF-COM-08530

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric displays. Key Features Extra-Large Digit – 6.5" (153mm) tall, visible at lon...

SKU: TB-RY6825

A 100µF 50V bipolar (non-polarised) electrolytic capacitor that can be installed in either orientation. Unlike standard electrolytic capacitors, bipolar types use two anodes connected in series, eliminating the need to worry about polarity during assembly. Bipolar electrolytics are commonly used...

SKU: AF-5172

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Red MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch&n...