All Products

SKU: SS-102010428

Features Powerful MCU: Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz Rich on-chip resources: 264KB of SRAM, and 2MB of onboard Flash memory Flexible compatibility: Support Arduino / Micropython / CircuitPython Easy project operation: Breadboard-friendly & SMD de...

SKU: SS-114991884

The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...

SKU: SS-106990021

The 5V/3.3V Breadboard Power Supply plugs directly into a standard breadboard and provides regulated 5V or 3.3V power to both rails. It accepts power via either a 7–15V DC barrel jack or a 5V Micro-USB input, giving you flexible options for powering your prototyping projects. Designed by Seeed S...

SKU: SS-110060062

The AllPixel PowerTap is a tiny accessory board (under 1" square) that simplifies power injection on long runs of LEDs. When running long LED strips, voltage drops can cause dimming and colour inconsistency — the PowerTap lets you easily inject power at regular intervals with a quick connect/disc...

SKU: SS-110060024

The Grove Starter Kit for Arduino from Seeed Studio is a beginner-friendly electronics kit built around the Grove modular connector system. It includes a Base Shield with multiple Grove connectors, twelve plug-and-play modules, and a user manual to help you get started quickly — no soldering or c...

SKU: SS-104990023

A pack of 20 common-cathode RGB LEDs in a standard 5 mm through-hole package. Each LED contains three independent colour elements — red, green, and blue — sharing a single cathode pin. Drive each colour individually for status indicators, or use PWM to mix colours and produce any hue you need. K...

SKU: SS-110010044

The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...

SKU: SS-110060762

Expand your micro:bit with the Grove Inventor Kit – a complete package of sensors, displays, and actuators that connect without soldering. The kit includes a Grove shield that adds plug-and-play Grove ports to your micro:bit, plus 8 carefully selected modules to get you building projects immediat...

SKU: SS-6000200319

Pico robot is a compact and cost-effective educational programmable 2WD smart car. It is based on Raspberry Pi Pico, and uses the MicroPython as programming language, combined with on-board sensors, many interesting functions are realized. This robot possess an infrared receiver and a Bluetoot...

SKU: SS-103030195

The Grove Shield for micro:bit is a plug-and-play expansion board that bridges the micro:bit with the Seeed Studio Grove ecosystem. It provides 4 Grove connectors on-board (covering different interfaces) with provision for 4 additional Grove ports, giving access to hundreds of Grove sensors, actu...

SKU: SS-110990161

A handy assortment of six power connector adaptors and converters for prototyping, electronics projects, and bench setups. This pack covers the most common power connector types — barrel jack, BNC, JST, and screw terminal — so you can quickly adapt between different power sources and devices. Pa...

SKU: SS-114992653

Features Easy Usage: Start by simply sliding into the Micro:bit Enhanced functionality: Equipped additionally with an RGB LED, a power switch, a power indicator, and six spare grove connectors Charge: Powered by a USB cable or an external battery Language Supported: MakeCode/MicroPython Comes wi...

SKU: SS-110061283

Raspberry Pi Pico swept the MCU world like a huge wave. Pico born with powerful performance, reasonable price, and comprehensive resources, it will definitely become a great platform for learning and mastering electronic knowledge.   To help you ride this wave, we launched the Grove Sta...

SKU: SS-110990032

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...

SKU: SS-101020003

A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digital input straight out of the box. Part of the Seeed Studio Grove ecosystem, it...

SKU: SS-101990004

This  is a non-contact distance measurement module, which is also compatible with electronic brick. It’s designed for easy modular project usage with industrial performance. Features Detecting range: 3cm-4m  Best in 30 degree angle  Electronic brick compatible interface&nbsp...

SKU: SS-101060001

Circuit Stickers are electronic stickers that you can use to build glowing, sensing, and interactive projects without any complicated equipment or programming skills. All you need is your imagination.   And this is an add-on sticker kit for Circuit Sticker Starter kit, with sound se...

SKU: SS-103990049

USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interface. this module is compatible with 5V and 3v3.and it can used for upload code or...

SKU: SS-321020000

A 1.5 m HDMI male-to-male cable for connecting HDMI-enabled devices such as Raspberry Pi boards, laptops, media players, and game consoles to monitors or TVs. Supports HDMI v1.3 standard. Key Features HDMI Male to HDMI Male – Standard full-size connectors on both ends 1.5 m Length – Convenien...

SKU: SS-103030002

The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...