All Products

SKU: AF-5970 · MPN: ADA5970

The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work with any IR remote control — even when you don't know the carrier frequency. U...

SKU: LB-LR0097-1

A compact infrared wireless remote control kit for Arduino projects. The kit includes an ultra-thin 20-key IR remote and a 38 kHz IR receiver module, providing a simple way to add wireless control to robots, interactive displays, and other Arduino-based builds. The IR receiver module decodes sta...

SKU: AF-5990 · MPN: ADA5990

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-channel FET at 100–200 mA per LED, you get 10+ metres of transmit range alongside ...

SKU: PL-837

The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tuned for a 56 kHz carrier frequency. This is the IR receiver used in the Polo...

SKU: PL-2463

The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a f...

SKU: EC-SPS40201S

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel outputs a low (TTL 0) signal and its indicator LED lights up. Each channel has an onbo...

SKU: LB-LR0309-6

A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders. Specifications Size – 5mm Lead Length – 37mm Wavelength – 940nm (infrared)...

SKU: SF-SEN-10266

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN d...

SKU: DF-SEN0503

An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a signal. Works up to 50 cm at 5 V with a fast response time under 2 ms. The com...

SKU: DF-DFR0274

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...

SKU: LB-KIT-MEDIA-8GB

Your living room media streaming hub Build a dedicated 4K media center with Kodi, LibreELEC, or Plex. The FLIRC case includes a built-in IR receiver so you can control everything with a standard remote. Raspberry Pi 5 — Choose your RAM (8GB or 16GB) Official 27W USB-C Power Supply — Clean, r...

SKU: AF-157 · MPN: 157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...

SKU: LB-LR0097-1-NEW

This infra-red receiver module is perfect for Arduino projects. It has a wide range of applications, including remote control, wireless data transmission, etc.

SKU: DF-MBT0021-EN-18650-4 · MPN: MBT0021-EN-18650-4

Designed for classroom robotics, after-school projects and competitions, this STEAM robot bundle combines the Maqueen Plus V2 18650 vehicle body with a micro:bit V2 board and the micro:Maqueen Mechanic kit for forklift, push, beetle and loader builds.Maqueen Plus V2 adds more expansion options, a...

SKU: DF-DFR1136 · MPN: DFR1136

This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....

SKU: EC-WRF43301R

A simple 433 MHz RF link kit consisting of a transmitter and receiver pair, commonly used for basic wireless remote control and data transmission between microcontrollers. The ASK (Amplitude Shift Keying) modulation makes these modules easy to use with popular Arduino libraries such as VirtualWir...

SKU: DF-DFR0094

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...

SKU: DF-MBT0021-EN-1

This advanced STEAM robotics platform is built for hands-on classroom learning, coding activities, autonomous navigation experiments and student competitions. It expands the Maqueen robot car platform with more onboard sensors, richer expansion options and a larger chassis for creative builds.The...

SKU: DF-MBT0021-EN-18650-1 · MPN: MBT0021-EN-18650-1

This compact programmable robot platform is designed for classroom robotics, AI experiments and hands-on engineering projects. Built around the micro:bit ecosystem, it brings together a mobile rover chassis, onboard sensors, lighting effects and expansion ports for building intelligent vehicle pr...

SKU: DF-DFR1216-1 · MPN: DFR1216-1

This multi-function expansion board adds power, I/O and drive capability to UNIHIKER M10/K10 and micro:bit projects. It is designed for mobile robots, portable interactive builds and maker projects that need more connectivity than the main controller can provide on its own.The board expands your ...