All Products

SKU: AF-372

An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increases as it cools, making it straightforward to measure temperature with a simple voltage divider circuit. The epoxy coating allows the thermistor to be...

SKU: LB-10K-5

A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable for measuring temperatures from −30°C to +110°C. NTC thermistors decrease in r...

SKU: AF-4890

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets c...

SKU: LB-LS2696

A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ADC input — just use a voltage divider with a matching 10K resistor. Key Featur...

SKU: LB-LS4792

10PCS 10K NTC Thermistor MF52 Thermal ResistorThis pack includes 10 MF52 NTC thermistors with a 10KΩ nominal resistance, designed for accurate and reliable temperature sensing in electronic circuits. Using MF52AT technology, these thermistors provide stable performance and are widely used in temp...

SKU: TB-RN3444

A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensation, and thermal protection circuits. Key Features NTC Ceramic Construction – R...

SKU: LB-LR0214-16

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (included) for measurement across a wide range of −50 to 110°C. The relay operate...

SKU: TB-RN3436

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and monitoring applications. Rugged ceramic construction with tinned copper leads fo...

SKU: TB-RN3442

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, and compensation circuits. Dipped in epoxy for durability, this through-hole com...

SKU: SF-SEN-00250

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document:  Datasheet Bildr Tutorial

SKU: AF-259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: AF-4755

The Adafruit Universal USB/DC/Solar Lithium Ion/Polymer Charger (bq24074) charges 3.7V/4.2V LiPo or LiIon batteries from virtually any power source — USB Type-C, DC adapter, or solar panel — with a wide 5–10V input range. Its near-MPPT solar tracking automatically draws the maximum current availa...

SKU: SF-COM-11508

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). These resistors...

SKU: AF-4712

The Adafruit LC709203F Fuel Gauge monitors your single-cell LiPo or Li-Ion battery and reports both voltage and state of charge as a percentage over I2C. It handles the non-linear voltage-to-percentage conversion for you, so your project always knows exactly how much battery is left — just like t...

SKU: AF-576

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident. To use, sim...

SKU: SF-COM-30222 · MPN: COM-30222

This compact resistor network packages eight individual 10k Ohm isolated resistors into one 16-pin 2506 surface-mount component. It is a handy way to save board space when a design needs several identical resistors close together.Each resistor element is rated for 63mW with a ±5% tolerance, makin...

SKU: EC-ELE18715S

A comprehensive electronics starter kit with over 200 components for Arduino and Raspberry Pi projects. Includes a breadboard, power supply module, jumper wires, LEDs, resistors, capacitors, ICs, and more — everything needed to begin learning electronics and programming. Key Features 200+ Comp...

SKU: DF-SEN0601 · MPN: SEN0601

The RS485 Soil Sensor provides real-time monitoring of soil temperature, moisture, and electrical conductivity (EC) in a single rugged probe. It communicates via the MODBUS-RTU protocol over RS485, making it easy to integrate with Arduino, Raspberry Pi, and automated irrigation or climate control...

SKU: LB-LR0010

Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is available at pin ‘AO’