All Products

SKU: PR-PIM182

The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...

SKU: AF-2738 · MPN: 2738

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘Astro Pi’. The Sense HAT has several integrated circuit based sensors can be used ...

SKU: WS-31278 · MPN: 31278

Four versions — check the Wireless option before you order This page sells all four factory versions of the Luckfox Core1106 Smart 86 Box. Two of them have Wi-Fi and Bluetooth fitted, and two do not. Wireless is not an add-on — it is soldered at the factory, so you cannot add it later. Pick your ...

SKU: KI-5626

Python Fix Now In Beta: Good News: The fix has now been added to a beta version of the Python editor for testing. Please note that although the fix is believed to be good, this is a beta release and therefore may contain bugs. If you find any bugs or quirky behaviour, please report it to the ...

SKU: DF-DFR1084 · MPN: DFR1084

The Arduino UNO R4 WiFi is the latest evolution of the iconic UNO series, powered by the Renesas RA4M1 (Arm Cortex-M4) processor running at 48 MHz — a 3× speed increase over the UNO R3. With 256 KB flash, 32 KB SRAM, USB-C, and built-in Wi-Fi/Bluetooth via an ESP32-S3 module, it's a major upgrade...

SKU: SF-PRT-08808

This is a very simple but extremely handy, 1" square, single sided perf board. Standard 0.1" spacing with a 4-40 (3mm) hole for mounting. Every three holes are connected with a 20mil trace.  Package of 2

SKU: RP-PICO-2W-ELEC

If you're looking for a Raspberry Pi Pico 2W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.The components of this Pico 2W Electronics Kit enable you to create electronics circuits for light and sound.Pico 2 Breadboarding can be hard, t...

SKU: RP-PICO-ELEC

If you're looking for a Raspberry Pi Pico Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico.The components of this Pico Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, that's wh...

SKU: RP-PICO-W-ELEC

If you're looking for a Raspberry Pi Pico W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico W.The components of this Pico W Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, tha...

SKU: PR-PIM352

pin:bit breaks out the useful pins from your micro:bit into a breadboard-friendly format, with clear labels to help keep your builds tidy and easy to follow.It is ideal for building small circuits on a breadboard and exploring components such as LEDs, buttons and analogue sensors. Just slot in yo...

SKU: DF-SEN0544

The GM73 is a high-performance barcode and QR code scanning module capable of reading common 1D and 2D codes from labels, paper, and screens in approximately 1 second. It uses advanced smart image recognition and decoding algorithms for fast, accurate scanning. With onboard Micro USB and UART (T...

SKU: AF-6165 · MPN: ADA6165

Create large-scale LED displays without piecing together individual strips. This ready-to-use NeoPixel outdoor netting arranges 1,600 RGB LEDs in a 20 × 80 grid across a 1 × 4 metre flexible net — all driven from a single data pin using standard SK6812/WS2812/NeoPixel protocol. Mount it on walls...

SKU: SF-LCD-19251

The TIMI-96 is a breadboard-compatible 0.96″ TFT LCD display module powered by the 4D Labs PIXXI-28 graphics processor. Designed to plug directly into a breadboard via its unique MatesBus interface, it lets you simulate instrument readouts, meters, and graphical displays during development — with...

SKU: AF-2945 · MPN: 2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: DF-FIT0909

This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3 core. The oscilloscope uses FPGA to manage the external ADC’s control and data cache mode. It provides 4 application partitions for loading and ...

SKU: AF-3467 · MPN: 3467

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of blue LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individual ...

SKU: AF-4121 · MPN: 4121

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of cool white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports indiv...

SKU: AF-4119 · MPN: 4119

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individua...

SKU: AF-4120 · MPN: 4120

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of green LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individual...

SKU: SF-DEV-19252 · MPN: DEV-19252

TIMI-96 is a breadboard-compatible display development module designed to make electronics testing, prototyping and education quicker and neater. It can be used stand-alone, driven by a host, tethered to a PC, or built into development projects.The module combines a 0.96” TFT LCD with a PIXXI-28 ...