All Products

SKU: E14-MP014889

A purpose-built enclosure for the Raspberry Pi 5 and official 10" touchscreen display, designed and manufactured in the UK. The black ABS housing integrates both the Pi and display into a clean, self-standing unit at a 33° angle — ready for touchscreen interaction straight out of the box. Precis...

SKU: DF-DFR0898

The 10 I/Os PLC Module is an industrial programmable logic controller based on the Arduino Nano. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control, with standardised PLC connectors and support for RS485, Ethernet (TCP/IP, Modbus TCP, Modbus RTU), ...

SKU: DF-DFR0899

The 10 I/Os Relay Module is an industrial PLC based on the Arduino Nano with relay outputs for switching higher-voltage loads. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control, with standardised PLC connectors and support for RS485, Ethernet (TCP...

SKU: DF-DFR0901

The 10 I/Os Relay Module with ESP32 is an industrial PLC that combines the connectivity of the ESP32 (Wi-Fi, Bluetooth LE, Ethernet, RS485) with relay outputs for switching higher-voltage loads. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control wi...

SKU: TB-RR0596

A pack of eight 10kΩ metal film resistors rated at 0.5W (½W) with 1% tolerance. Despite the higher power rating, these resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgrade for projects that need tighter tolerance or extra headroom. Key Features 1...

SKU: AF-372

An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increases as it cools, making it straightforward to measure temperature with a simple voltage divider circuit. The epoxy coating allows the thermistor to be...

SKU: AF-2171

Keep your 10mm LEDs securely mounted with these plastic bevel-style LED holders. Simply slot the LED through the opening and it snaps into place, giving a clean, finished look to your project. Key Features 10mm LED Size – Designed for standard 10mm through-hole LEDs Snap-Fit Design – LEDs cli...

SKU: LB-10M-RESISTOR

A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and leakage current sensing circuits. Key Features 10MΩ, 1% Tolerance – Very high r...

SKU: LB-10M-RESISTOR-500

A bulk pack of 500 × 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. Ideal for production runs, classroom kits, or stocking up the parts bin. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...

SKU: LB-LS5179-5

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless electrical connection that can be disconnected and reconnected as needed. The 2.54...

SKU: LB-LS4792

10PCS 10K NTC Thermistor MF52 Thermal ResistorThis pack includes 10 MF52 NTC thermistors with a 10KΩ nominal resistance, designed for accurate and reliable temperature sensing in electronic circuits. Using MF52AT technology, these thermistors provide stable performance and are widely used in temp...

SKU: AF-3596

A set of 10 hot air rework nozzles for surface-mount soldering repair. The kit includes five round nozzles in various diameters for general-purpose work, plus five specialty nozzles designed for removing and reworking QFN and QFP packages. Use the smallest nozzle that fits your target component ...

SKU: SF-CAB-17124 · MPN: CAB-17124

This simple cable is fitted with 10-pin 1.25mm pitch connectors on both ends, making it suitable for connecting compatible boards, modules or assemblies.The connectors are equivalent to the Molex PicoBlade style, with 10 positions carried straight through from one end to the other.10-pin cable1.2...

SKU: AF-1675

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boards. Key Features 1.27mm (0.05") Pitch – 2×5 box header connectors on both end...

SKU: AF-1199

A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin headers to individual connections on a breadboard or test setup. Key Features 1...

SKU: AF-370

A 6" (150mm) IDC ribbon cable with 10-pin 2×5 socket connectors on both ends at standard 2.54mm (0.1") pitch. Commonly used for AVR ISP programming, JTAG connections, and other 10-pin box header interfaces. Key Features 10-Pin (2×5) – Standard box header socket connectors on both ends 2.54mm ...

SKU: LB-00185

A 10-wire splittable ribbon jumper cable with female (socket) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and prototyping work. Key Features Female-to-...

SKU: LB-00184

A 10-wire splittable ribbon jumper cable with a male (pin) connector on one end and a female (socket) connector on the other. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and proto...

SKU: LB-00183

A 10-wire splittable ribbon jumper cable with male (pin) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they're a good length for breadboard and prototyping work. Key Features Male-to-Male (M...

SKU: LB-732-2865-ND

A 10-position single-row right-angle header with gold-plated pins at standard 2.54mm (0.1") pitch. Through-hole mounting for PCB soldering, with pins oriented at 90° for horizontal mating with female connectors or jumper wires. Specifications Positions – 10 (single row, 1×10) Pitch – 2.54mm (...