All Products

SKU: AF-5443

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, comes in Adafruit black. CAT6 means it's great for Ethernet-based ...

SKU: AF-3757

Plastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. But we've noticed that there are not a lot of nice TT motor wheels to go along with them.This TT DC Motor Wheel is solid, but thin, so it won't make your robot bulky. It even co...

SKU: AF-6095 · MPN: ADA6095

This skull-shaped LED filament uses COB (Chip-on-Board) technology — dozens of micro LED diodes bonded to a rigid metal backing and coated in silicone — to produce a warm, uniform glow similar to Edison-style LED bulbs. The LEDs are positioned on one side, with a subtle glow visible through the u...

SKU: PR-PIM058

The Skywriter HAT uses electrical near-field 3D sensing to detect hand gestures and track position in three dimensions above the board. Powered by the Microchip MGC3130 sensor on a 4-layer PCB, it provides full X, Y, and Z positional data along with gesture recognition for flicks and taps — all w...

SKU: DF-DFR1220 · MPN: DFR1220

The SLAMTEC Aurora is an all-in-one perception sensor for autonomous robots, combining LiDAR, binocular vision, inertial sensing and onboard AI processing in a single mapping and localisation unit. It is designed to produce high-precision 3D maps and stable 6DOF positioning data without the usual...

SKU: DF-DFR0628

SLAMTEC MAPPER M1M1-360°Laser Mapping Sensor TOF 20m is a new laser range scanner category with built-in mapping and localization feature.Slamtec Mapper, a new laser range scanner category integrating map building and real time localization and navigation, contains the SLAMTEC third generation hi...

SKU: AF-4010

Is your favorite robot currently in a mid-life crisis? Does it need a new purpose or perhaps, direction?  Well now you can find your way with the affordable and easy to use Slamtec RPLIDAR A1.You may have heard of LIDARs when people talk about self-driving cards. A LIDAR is a sensor that can...

SKU: SF-COM-09120

This is the knob that connects to the linear slide potentiometer. Knob has a nice friction fit onto slide.Documents: Datasheet

SKU: SF-COM-14889

A replacement knob for small and medium sized linear slide potentiometers. The knob attaches via friction fit onto the slide pot's slider, providing a more comfortable and precise control surface for your project. Key Features Friction Fit – Press-fits onto the slider with no tools required C...

SKU: AF-4219

This 75mm slide potentiometer is a linear 10KΩ pot with a smooth, satisfying action and an included grippy plastic knob with a white position marker. Use it as a voltage divider, input control, or anywhere you need a visual, tactile slider interface. The three solder legs are compatible with bre...

SKU: AF-4271

This 35 mm slide potentiometer offers a compact, linear input control for your projects. Use it as a voltage divider where the slider position gives you a visual indication of the output level — perfect for mixing boards, LED brightness controls, and interactive prototypes. The 10 kΩ linear tape...

SKU: AF-4272

Slip slidin' away Slip slidin' away You know the nearer your resistance The more you're slip slidin' awayIf you're tired of the regular-old-twisty potentiometers we carry, why not slide over and try this slide pot? Most famously used on mixers and the transporter control panel on S...

SKU: SF-COM-11621

A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top. Dimensions: 9.5mm x 45mm Documents: Datasheet (C3031N-1A2-B10K-GP)

SKU: SF-COM-11620

A compact linear-taper slide potentiometer rated at 10 kΩ and 0.1 W. This small slider features solder tab connections, a 20 mm travel distance, and two mounting holes for easy installation. Key Features Linear Taper – Smooth, proportional resistance change across the travel range Solder Tab ...

SKU: MM-SKU00085

The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The board uses a 10kΩ linear variable resistor (pot) to output a voltage between 0 and 3V that can be measured in your micro:bit programs using one of the micro:bit connections as a...

SKU: AF-6412 · MPN: ADA6412

We accidentally got these cables that were supposed to be assembled into Slim HDMI cables - but obviously are missing the actual connectors. So we're putting them on clearance since they might be useful for some builds that need 19 conductors (4 straight conductors plus 5 sets of 3-wire twisted t...

SKU: AF-2420

A slim, high-quality HDMI cable measuring just 450mm (1.5 feet) long with a ultra-thin ~4mm diameter. Designed to connect two HDMI devices together while staying out of the way in tight spaces and tidy setups. Featuring molded grips for easy plugging and unplugging, this cable is perfect for Ras...

SKU: AF-2058

This slim and modern potentiometer is small and compact, yet looks good and has a nice feel. We hand selected the best knobs for your project in different sizes and varieties.  This one is the Slim Metal Knob 10mm diameter x 10mm Tall (T18 Splines). It's a brushed aluminum knob with a sh...

SKU: AF-2057

A slim, modern brushed aluminium potentiometer knob with a black anodised finish and a silver position indicator mark. Compact and understated, suitable for projects where a clean, professional look is needed. Specifications Diameter – 10 mm Height – 15 mm Shaft Type – T18 spline (knurled) ...

SKU: AF-6369 · MPN: ADA6369

This short USB-C cable is made for tidy, compact connections where a standard cable would take up too much space. It is well suited to linking USB-C devices inside an enclosure or anywhere you need a low-profile cable run.The right-angle metal plugs are durable and easy to grip for plugging and u...