All Products

SKU: DF-FIT0611

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. Using this environment-friendly product, you can save about 200 batteries in on...

SKU: DF-FIT0588

This is a CE-certified XT90 plug that is mini-sized and takes up less space. The banana plug features a true gold plating and a cross-slot design with a larger contact area that can withstand a constant 40A and peak current of 90A.The plastic case is made of insulating material and adopts hollow...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: SF-CAB-11301

A 6-foot (1.8 m) USB 2.0 cable with a Type-A plug on one end and a Mini-B 5-pin plug on the other. Use it to connect cameras, USB hubs, FTDI programmers, LiPo chargers, and other devices that use the Mini-B connector. Specifications Connector A – USB Type-A (male) Connector B – USB Mini-B 5-p...

SKU: AF-727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: SF-TOL-16886

Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V, 2.4A USB car charger. These car chargers have a standard USB 'A' connector for the output so you can power your Arduino, Raspberry Pi, etc. through a USB cab...

SKU: SF-TOL-08639

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications Input – USB-A male plug Output – 5.5 × 2.1 mm barrel jack, centre positive V...

SKU: AF-1833

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or prototype custom USB connections on a breadboard. The board uses a micro-AB conne...

SKU: AF-2089

A snap-in battery holder for Sony NP-F series camcorder batteries, with a pre-attached 2.1 mm DC barrel plug for powering 7 V DC devices. Clip in a compatible Li-Ion battery pack and connect directly to robots, Arduino projects, LED panels, or any device with a standard DC jack — no soldering or ...