All Products

SKU: AF-1444

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the l...

SKU: AF-1479

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1683

This latching pushbutton toggle switch provides a simple push on / push off action — press once to turn on, press again to turn off. It delivers a satisfying tactile click and can reliably handle up to 500 mA at up to 50 V, making it well suited as a power switch or mode toggle for electronics pr...

SKU: AF-1439

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently ...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...

SKU: DF-DFR1202 · MPN: DFR1202

A high-efficiency DC-DC step-down (buck) converter that accepts 6–24 V input and delivers a stable 5 V output at up to 16 A. With over 90% conversion efficiency at typical loads and output ripple below 20 mV, it provides clean, reliable power for demanding applications. The module includes over-...

SKU: AF-4354

The Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit combines a full-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you get labelled pin breakouts alongside 60 rows of breadboard-style prototyping sp...

SKU: AF-1685

A push-button toggle switch with three wire leads. Each press alternates the connection — push once to connect the middle pin to one side, push again to switch it to the other. It functions as a simple, satisfying mechanical toggle without the bulk of a traditional switch. The pre-attached wire ...

SKU: AF-1476

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the lig...

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: AF-424

A six-piece precision screwdriver set covering the most common sizes found in consumer electronics, small devices, and maker projects. The set includes three Phillips and three flat-head drivers in a compact carrying case. Each screwdriver features a contoured plastic handle with textured grip s...

SKU: LB-LS0469

A simple and reliable SPST toggle switch for controlling power in your electronics projects. Flip the lever to switch between ON and OFF positions — ideal for powering circuits, motors, LEDs, and other 12V loads. Key Features SPST Configuration – Single Pole, Single Throw with two terminal con...

SKU: AF-5220

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 1 meter long, with all the pins connecting from one side to the other.

SKU: AF-420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: AF-6366 · MPN: ADA6366

This compact ePaper module is designed for adding a small, paper-like display to your electronics project. It features a 2.13-inch quad-colour panel with a 250 x 122 pixel resolution and on-board SRAM.2.13-inch eInk/ePaper display250 x 122 pixel resolutionQuad-colour panelIncludes SRAMIt’s a prac...