All Products

SKU: SF-DEV-11113

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommen...

SKU: SF-COM-18375

This is a high grade DC Buck converter that inputs 6 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that need to power a USB or 5V device even while the input is varying (battery charge/...

SKU: SF-KIT-19935

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: SF-BOB-23055

With this USB-C breakout, you will be able to incorporate a vertical USB-C connector into your projects without needing to solder each tiny SMD pad. The vertical orientation of the USB-C connector also makes it convenient for panel mounts in projects.The SparkFun USB-C Breakout supplies up to thr...

SKU: SF-BOB-13830

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other support circuitry to get t...

SKU: SF-DEV-13664

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an o...

SKU: SF-GPS-09123

This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

SKU: SF-DEV-15801

The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard USB connection, this board can request higher voltages — typically 5–20 V and up...

SKU: SF-GPS-09129

Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

SKU: SF-SEN-18020

The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO we've created this small breakout board just for you! Each LSM6DSO breakout has...

SKU: SF-TOL-09507

A simple, fixed-temperature 30W soldering iron for basic through-hole and general soldering work. Quick heating with a 1/32″ pointed tip included. The heating element and tip are replaceable. Features a comfortable grip with built-in heat shield and a 6-foot (1.8 m) power cable. Warning: This ...

SKU: SF-DEV-15025

The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF52840 – a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your project, you’ll be presented with a seemingly endless list of project-possibiliti...

SKU: SF-DEV-13741

In 2015 we developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the multiple trade shows we appeared at. In 2016 we have refined the BadgerStick into what you see here, the SparkFun RedStick! The RedStick combines some of ...

SKU: SF-GPS-18378

The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal accuracy. It connects to a MicroMod Main Board via the solderless M.2 connector and...