All Products

SKU: ET-1734948

Description: This 5m Cat5 lead is perfect for all your (longer) Raspberry Pi networking needs. Features: LEAD, CAT 5E, 5M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Metric: 5m Jacket Colour: Black Cable Assembly Type: Network Cable Length: 5...

SKU: DF-FIT0855

This HDMI to RJ45 Ethernet Cable Extender consisting of a transmitter and a receiver is designed to synchronously transmit audio and video signals up to 30m with zero latency.The module supports HD 1080P video signal transmission.Gold plated HDMI interface, anti-oxidation, not easy to rust.No pow...

SKU: SF-BOB-00716

RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breadboarding or create...

SKU: SF-PRT-08534

Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, and shielding. Documents: Datasheet

SKU: WS-30489 · MPN: 30489

The Mini Base Board (A) is a compact carrier board designed for the Raspberry Pi Compute Module 5 (CM5). It supports all CM5 variants — both Lite and eMMC — and provides a rich set of interfaces including dual HDMI output, USB 3.2, Gigabit Ethernet, PCIe, and a 40-pin GPIO header. The board meas...

SKU: AF-4170

A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable edge. Key Features 16 Pins (2×8) – Standard IDC ribbon cable layout 305mm (1...

SKU: SF-COM-09378

Atmel’s itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. Documents: Product Card Arduino Board Definitions

SKU: AF-1800

A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the three contact points and you have a custom cable ready to go. Key Features ...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...

SKU: SF-PRT-17257

This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: AF-5986

This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a practical choice for embedded audio projects, displays, and interactive installati...