All Products

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: AF-6491 · MPN: ADA6491

This compact breakout combines a Vishay VCNL4030 proximity sensor and ambient light sensor on one board. It can measure proximity from 0 to 300mm (about 12 inches) and light from 0.004 to 16,768 lux, making it a handy option for touchless controls, presence detection and light-aware projects.The ...

SKU: AF-5425

The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long light takes to bounce back, delivering accurate distance readings without the linea...

SKU: PR-PIM082

Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projectsGreat for little robots, games, science ...

SKU: SF-DEV-17119

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...

SKU: AF-3203

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a solderless...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: SF-SEN-29529 · MPN: SEN-29529

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...

SKU: EF-EF03404

Micro:bit Breadboard Adapter is a breadboard pinboard based on Micro:bit. It can be directly plugged into breadboard. Through this adapter, you can start various DIY creation on Micro:bit Breadboard.Features:1. Fully compatible with Micro:bit board; 2. All Micro:bit connect ports can be corr...

SKU: SF-PRT-27576 · MPN: PRT-27576

Product Overview Meet the SparkFun Navigation Switch, a nifty little addition to your I²C bus that features a 5-way tactile switch akin to a joystick! This compact component allows you to interact with your microcontroller by pushing the switch in any of five directions—up, down, left, right, or...