All Products

SKU: SS-103990049

USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interface. this module is compatible with 5V and 3v3.and it can used for upload code or...

SKU: DF-FIT0261

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example,there have been limited studies on using these materials in robotics. They make it possible to create very lig...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: SF-WRL-28896 · MPN: WRL-28896

  The RockBLOCK 9704 by Ground Control is a breakout board for the new Iridium 9704 including a built-in patch antenna and a supercap charger to enable low power operation. If you need low data rate connectivity over the entire globe, Iridium is the answer. RockBLOCK 9704 leverages the I...

SKU: SF-BOB-11722

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version! Simply solder an encoder down to the board and you’r...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: DF-DFR1224 · MPN: DFR1224

Restore a Maqueen V5 STEM robot after a damaged or jammed drive motor with this official replacement N20 motor accessory kit. It is intended as a repair part for an existing Maqueen V5, rather than an add-on needed when purchasing a new robot.The motor comes with pre-soldered PCB and pin headers,...

SKU: SF-KIT-18006

The Elektor MIT App Inventor Bundle is a kit built to help learn about developing apps for Android compatible mobile devices using the MIT App Inventor online development environment. MIT App Inventor projects can be in either standalone mode or use an external processor. In standalone mode, the ...

SKU: EC-ESP11002R

A WiFi-controlled relay module designed for ESP-01 or ESP-01S modules (based on the ESP8266). The relay is controlled via GPIO0 with a low-level trigger, allowing you to switch mains-powered devices on and off wirelessly from a phone or any WiFi-connected device. APP and LUA source code are provi...

SKU: AF-5793

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7...