DFRobot
Maqueen V5 Replacement N20 Motor Kit
· MPN: DFR1224
Restore a Maqueen V5 STEM robot after a damaged or jammed drive motor with this official replacement N20 motor accessory kit. It is intended as a repair part...
Get notified when back in stock
Restore a Maqueen V5 STEM robot after a damaged or jammed drive motor with this official replacement N20 motor accessory kit. It is intended as a repair part for an existing Maqueen V5, rather than an add-on needed when purchasing a new robot.
The motor comes with pre-soldered PCB and pin headers, so replacement is a straightforward plug-in swap with no soldering required. It is designed to match the original Maqueen V5 motor specifications for proper fit and performance.
Each kit includes 1 N20 metal motor with pre-soldered PCB and pin headers, 1 motor mounting bracket, 2 mounting screws and 1 sponge pad for battery box cushioning. If both motors on the robot are damaged, you will need two kits.
A motor replacement wiki guide is available from the manufacturer to help with the repair process.
Features:
- All-in-One Solution: Includes one motor, a mounting bracket, screws, and a pad—everything needed for a single motor replacement.
- Quick & Easy Repair: The motor comes with pre-soldered pin headers, so no soldering is required. Simply swap the old motor out and plug the new one in.
- Official Accessory: Guarantees perfect compatibility and performance, matching the original motor specifications of the Maqueen V5.
Specifications:
- Interface: 2P 2.54mm Pin Header (Straight Type)
- Screw: M2×8 Cross-Recessed Pan Head Combination Screw
- Model: N20
- Rated Voltage: 3V DC
- No-Load Speed: 10,000 RPM (at Rated Voltage)
- Gear Reduction Ratio: 1:110 (Mechanical Reduction)
- Output Shaft Speed: 90 RPM (at Rated Voltage)
- Rotation Direction: CCW (Counterclockwise, Viewed from Output Shaft End)
- Motor Mount: ABS (Acrylonitrile Butadiene Styrene)
- Sponge Pad: Black Closed-Cell Polyurethane Foam Tape, Single-Sided Adhesive, 20mm×15mm×5mm
Ideal for classroom repairs, maintenance kits and keeping Maqueen V5 robots running after heavy student use.
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Robotics & Motion
Supplier page — dfrobot.com
Supplier Description · 175.9 KB · Click any page to view full size
