All Products

SKU: WS-25133

This 0.96″ RGB OLED Display Module features a 64×128 pixel resolution with 65K colours, delivering vivid and clear visuals from an OLED panel. Driven by the SSD1357 controller over SPI, it requires minimal I/O pins and comes with example code for Raspberry Pi, Arduino, and STM32 platforms. The m...

SKU: WS-24777

A compact 1.32-inch OLED display module with 128×96 resolution and 16 levels of greyscale. The ultra-narrow bezel and onboard voltage translator make it easy to integrate into space-constrained projects. Built around the SSD1327 driver chip, it supports both 4-wire SPI and I2C interfaces for fle...

SKU: WS-25093

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with 3.3 V and 5 V microcontrollers. Waveshar...

SKU: WS-25512

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with both 3.3 V and 5 V microcontrollers. Waveshare pro...

SKU: WS-25742

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...

SKU: WS-30953 · MPN: 30953

A 0.96″ white OLED display module designed to snap into the Argon ONE V5 case for Raspberry Pi. Once installed and configured, it displays real-time system information including CPU temperature, uptime, and IP address — useful for headless setups or quick status checks without connecting a monito...

SKU: SF-WIG-30051 · MPN: WIG-30051

TRMNL gives you a standalone, low-distraction dashboard for the information you want to see at a glance. Its 7.5″ monochrome E-Ink display is suited to ambient updates such as calendars, status panels, reminders, and other slow-changing information without the glare of a traditional screen.The un...

SKU: SF-GPS-26916 · MPN: GPS-26916

This compact high-precision positioning board combines a Quectel LG290P GNSS RTK receiver with an Espressif ESP32-PICO-MINI-02 MCU module. It runs SparkFun’s RTK Everywhere firmware, letting it operate as a base station or rover for precision navigation projects.The ESP32 adds WiFi, Bluetooth® an...

SKU: SF-KIT-29326 · MPN: KIT-29326

Start learning embedded electronics with a complete MicroPython kit designed for beginners. It guides you from blinking your first LED through to building and programming an autonomous robot, with no prior programming or electronics experience required.The kit is built around MicroPython, a begin...

SKU: AF-6366 · MPN: ADA6366

This compact ePaper module is designed for adding a small, paper-like display to your electronics project. It features a 2.13-inch quad-colour panel with a 250 x 122 pixel resolution and on-board SRAM.2.13-inch eInk/ePaper display250 x 122 pixel resolutionQuad-colour panelIncludes SRAMIt’s a prac...

SKU: AF-3813 · MPN: 3813

This complete pack includes everything you need to build animated eyes with a Raspberry Pi (not included). The Adafruit Snake Eyes Bonnet drives two high-density 1.54" TFT displays at 240×240 resolution with IPS wide-angle viewing, delivering sharp, vibrant eye animations with image quality rival...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: AF-4471 · MPN: 4471

The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from Python on Mac, Windows, or Linux. The MCP2221A from Microchip provides USB-to-I2...

SKU: PR-PIM532

Breakout Garden plugs into your shiny new Pi 400's GPIO pins and lets you connect up to three of our extensive selection of Pimoroni breakouts so they're conveniently facing towards you and the right way up. We've got environmental sensors so you can keep track of the temperature and humidity in ...

SKU: LB-MICRO-EDU

Dive into the world of coding, electronics, and robotics with our comprehensive Micro:Bit Education Kit. Perfect for educators, students, and makers alike, this kit includes everything you need to explore and create innovative projects including lots of tutorials!   What's Included: 1 x...

SKU: SF-LCD-24177 · MPN: LCD-24177

This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...

SKU: DF-DFR0515

The FireBeetle OSD Character Overlay Module adds on-screen character display to composite video (AV) signals. Based on the AT7456E OSD chip, it overlays up to 16×30 characters onto NTSC or PAL video feeds — ideal for adding timestamps, telemetry data, or status information to camera and monitorin...