All Products

SKU: AF-2547

For advanced NeoPixel fans, we now have a bendable, Flexible 16x16 NeoPixel LED Matrix! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw little images. This matrix has a thick flexible PCB backing that can be gently bent ...

SKU: AF-2566

This product's about as simple as a cup of lemonade on a hot summer day.  And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter.  It's a perfect way to add a simple link between things like our Flora NeoPixels and more co...

SKU: AF-2350

These APA102 (DotStar) warm white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three warm white (~3000K) dies. The phosphor coating produces a consistent, diffused warm light that looks far better than mixing RGB ...

SKU: AF-2351

These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating produces a consistent, diffused white light that looks far better than mixing RGB...

SKU: AF-2343

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED used in DotStar LED strips, now available as individual components for custom desig...

SKU: AF-1887

Try the JavaScript of things with the Espruino - the world's first open-source JavaScript microcontroller! This little board has an STM32 microcontroller pre-programmed with Espruino all ready to go so you can start playing with Javascript-microcontrollers. Warning: if you only use Assembly an...

SKU: AF-2242

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropr...

SKU: AF-2238

The Adafruit DotStar Digital LED Strip (30 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-2329

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropr...

SKU: AF-2237

The Adafruit DotStar Digital LED Strip (30 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-1850

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a coin cell battery holder — everything you need to start sewing glowing electronic...

SKU: AF-1849

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and everything you need to build interactive sewable projects — no soldering required. ...

SKU: AF-1792

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: AF-1426

Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as th...

SKU: AF-1463

Round and round they go! 16 ultra-bright smart RGB NeoPixels are arranged in a circle with a 44.5 mm (1.75″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive for consistent brightness regardless of ...

SKU: AF-1643

Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive for consistent brightness regardles...

SKU: AF-1758

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...

SKU: AF-1755

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...

SKU: AF-1756

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...