All Products

SKU: DF-DFR0375

INTRODUCTION The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to prevent bad connections from destroying the board. The board is protected from reve...

SKU: DF-KIT0069

The DFRobot Bluetooth 4.0 RGB LED Strip Kit combines a 3-metre WS2812 addressable LED strip with a Bluno (Arduino-compatible Bluetooth 4.0 board), sound sensor, and audio analyser. Control every individual LED from your iPhone or Android device via Bluetooth Low Energy — change colours in real ti...

SKU: DF-DFR0439

These LED string lights are composed of a series of LEDs that have a colorful glow. They can be used as decorations and for other interesting applications. Use them as outdoor string lights, string lights in your bedroom, on your patio or on a globe. There are many applications, what can yo...

SKU: DF-TEM2022C-EN-1

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...

SKU: DF-SEN0131

INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes and cigarette smoke. It can be used in gas leakage detecting equipment in...

SKU: DF-ROB0150

This board can be a cool clock, a timer, a Lucky Turntable Game, a wearable ornament, and an interactive colored pendant. With a micro:bit main board, this 24 RGB LEDs circular expansion board changes to an exquisite creator's piece. You can turn it into a tomato timer v...

SKU: DF-SEN0130

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...

SKU: DF-MBT0044-1 · MPN: MBT0044-1

This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...

SKU: DF-DFR0555

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...

SKU: DF-SEN0132

INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity can be adjusted by the potentiometer. The output is proportional to the density o...

SKU: DF-DFR0548

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, ...

SKU: DF-FIT0769

This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and analog sensors such as Ambient light sensor, Gray sensor, MIC sound, etc. It con...

SKU: DF-DFR0518

Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting DFRobot Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch...

SKU: DF-FIT0031

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. Each cable features a servo-type connector (Signal, GND, PWR) on one end and a 3-...

SKU: DF-DFR0469

A high-precision I2C real-time clock (RTC) module from DFRobot's Gravity series, based on the SD2405AL chip. It features an internal rechargeable battery that keeps time for 5–8 years without external power, making it ideal for data logging, alarm clocks, and any project that needs reliable timek...

SKU: DF-DFR0061

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intuitive directional input — ideal for robot control, menu navigation, and game proj...