All Products
Showing 41-60 of 82 products · 18 unavailable products hidden
SMT Socket Header Kit for FeatherWings
·
These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and slim and are designed to match with FeatherWings. It's harder to solder than thru-hole type headers...
Adafruit Grove and Stemma QT FeatherWing for all Feathers
·
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...
4.2" 400x300 Tri-Colour eInk Bare Display
·
E-Ink and ePaper displays are ideal for projects that need a crisp, low-power screen that remains readable in daylight. The image stays on the display even when power is completely disconnected, giving it a printed-paper style look.This bare 4.2 inch diagonal tri-colour display has 400 x 300 pixe...
Adafruit 2.13 Monochrome eInk / ePaper Display with SRAM - 250x122 Monochrome
·
Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...
Assembled Adafruit Prop-Maker FeatherWing
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay ...
Adafruit 2.9 Red/Black/White eInk Display Breakout - THINK INK
·
Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of col...
SparkFun Qwiic Shield for Thing Plus
The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to standard 1 mm pitch JST connectors for solderless daisy-chaining of Qwiic-compatib...
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
·
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...
Adafruit LED Glasses Driver - nRF52840 Sensor Board
·
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly as a compact standalone development board with built-in sensors and STEMMA QT con...
Adafruit CAN Pal - CAN Bus Transciever
·
The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. This is a transceiver only — it does not include a CAN controller, so your microco...
Adafruit CAN Bus BFF Add-On for QT Py
·
The Adafruit CAN Bus BFF is a compact add-on that brings CAN bus capabilities to any QT Py or Xiao board. Powered by the MCP26525 chipset with SPI interface, it provides better range and addressing than I2C, making it well suited for robotics and sensor networks. Drivers are available for both Ar...
Adafruit Wiz5500 Ethernet Co-Processor Breakout Board
·
Add reliable wired Ethernet to your microcontroller project with the Adafruit Wiz5500 Ethernet Breakout Board. The WIZ5500 chip handles TCP/IP over SPI, letting you skip the hassle of WiFi passwords and antennas for a fast, dependable network connection. The breakout includes full level shifting...
Adafruit NeoPXL8 FeatherWing for Feather M4 - 8 x DMA NeoPixels!
·
Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,000 total) — all running in the background via hardware DMA on the ATSAMD51's blaz...
Adafruit Floppy FeatherWing with 34-Pin IDC Connector
The Adafruit Floppy FeatherWing lets you read and write 3.5-inch or 5.25-inch floppy disks using a Feather microcontroller. It connects to standard 34-pin IDC floppy drives and includes built-in level shifting between 3.3 V Feather logic and the 5 V signals that floppy drives require. Floppy dri...
Adafruit SHARP Memory Display Breakout - 1.3 168x144 Monochrome
·
The Adafruit SHARP Memory Display Breakout features a 1.3" 168×144 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The display shows crisp black pixels on a grey background, giving a pleasant e-reader appearance that's exce...
24-pin eInk / ePaper Extension Cable 0.5mm Pitch - 25cm Long
·
A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in a case, frame, or enclosure separate from the main electronics. Simply pry ope...
Adafruit Feather RP2040
·
The Feather RP2040 brings the Raspberry Pi RP2040 dual-core processor to the Feather platform. With two ARM Cortex M0+ cores running at ~125 MHz, 264 KB SRAM, 8 MB SPI flash, and the RP2040's unique PIO (Programmable I/O) state machines, this board offers excellent performance for CircuitPython, ...
Assembled Adafruit HUZZAH32 – ESP32 Feather Board - with Stacking Headers
·
Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer c...
Assembled Feather HUZZAH w/ ESP8266 WiFi With Stacking Headers
·
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi developme...
Assembled Adafruit Feather HUZZAH with ESP8266 WiFi With Headers
·
Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one'...
