All Products

SKU: SF-CAB-22038

This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create st...

SKU: SF-CEL-00290

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated. Key Specifications: Quad-band: 850/900/1800/1900MHz a...

SKU: LB-LS1307

This is the ESP32-CAM WiFi + Bluetooth Camera Module! It is designed be used for a wide range of IoT applications. For example, you could use it to build your own smart home device, set up a security monitoring system, and other IoT applications. It works by Bluetooth 4.2 standards and is...

SKU: SF-WRL-00593

PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: LB-LR0335-FG

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant fluorescent green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, sh...

SKU: AF-2717

The TCA9548A 1-to-8 I2C multiplexer solves the common problem of needing multiple I2C devices with the same address on a single bus. It acts as a gatekeeper, routing I2C traffic to any of its eight downstream channels on command. Simply write a single byte to the multiplexer's I2C address (defau...

SKU: AF-5663

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a single byte to select the active channel and all subsequent I2C traffic is route...