All Products

SKU: AF-1312 · MPN: 1312

This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on each side for easy soldering, chaining and breadboarding. These ultra-bright LEDs...

SKU: SF-DEV-28369 · MPN: DEV-28369

This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...

SKU: SF-DEV-28370 · MPN: DEV-28370

This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...

SKU: PL-2126

A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather monitoring, and indoor navigation applications. The board includes an onboard 3....

SKU: SF-SEN-09673

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approximately 2.5 kΩ at full force — making it easy to detect touch, squeeze, and weight...

SKU: SF-DEV-09713

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and ru...

SKU: SF-COM-09806

There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Little Bird, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD ...

SKU: AF-1922 · MPN: 1922

A 10-segment LED bar graph display in bright yellow. Similar to the amber version but a bit brighter with more yellow. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow across all...

SKU: AF-1923 · MPN: 1923

A 10-segment LED bar graph display in yellow-green. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow across all 10 segments. Each of the 10 LEDs has its own anode and cathode ac...

SKU: AF-1815 · MPN: 1815

A 10-segment LED bar graph display in blue. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow across all 10 segments. Each of the 10 LEDs has its own anode and cathode across 20 ...

SKU: AF-1816 · MPN: 1816

A 10-segment LED bar graph display in white. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow across all 10 segments. Each of the 10 LEDs has its own anode and cathode across 20...

SKU: AF-1814 · MPN: 1814

A 10-segment LED bar graph display in pure green — a vivid, true green that's much closer to blue than typical "yellow green" LEDs. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even gl...

SKU: AF-1813 · MPN: 1813

A 10-segment LED bar graph display in a warm amber colour. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow across all 10 segments. Each of the 10 LEDs has its own anode and cat...

SKU: SF-WRL-10532

The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to create basic wireless data links at up to 4800 bps. As a receive-only module, it ha...

SKU: SF-WRL-10533

A simple 315 MHz wireless receiver module that pairs with 315 MHz transmitters to create a basic one-way data link. It fits easily into a breadboard and works well with microcontrollers like Arduino for straightforward wireless communication projects. Since this is a receive-only module, it hand...

SKU: AF-3295 · MPN: 3295

Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Perfect for datalogging, clock building, time stamping, timers, and alarms. Works...

SKU: AF-395 · MPN: 395

An 8-channel bidirectional logic level converter breakout based on the TXB0108 chip. This converter automatically detects signal direction, eliminating the need for direction control pins. It shifts between virtually any two voltage levels, making it ideal for connecting 3.3V and 5V devices. The...

SKU: SF-SEN-11207

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pre...

SKU: SF-BOB-11722

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version! Simply solder an encoder down to the board and you’r...

SKU: SF-SEN-13963

The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three additional analogue inputs and built-in movement detection features such as tap, dou...