All Products

SKU: LB-PT-SERVO

A compact 9 g continuous rotation micro servo that spins 360° in either direction, rather than moving to a fixed position like a standard servo. Control it with any servo library, code, or hardware — just set the signal to control speed and direction. Perfect for beginners who want to add moveme...

SKU: DF-MBT0021-EN-18650-4 · MPN: MBT0021-EN-18650-4

This bundle brings together the micro:Maqueen Plus V2 18650 robot car, the micro:Maqueen Mechanic add-on kit, and a micro:bit V2 board for classroom STEAM lessons, after-school projects and robot competitions. Batteries are not included.Maqueen Plus V2 is an expanded educational robot platform wi...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: AF-2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: AF-2220

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 16 MB of built-in flash storage, it holds approxim...

SKU: DF-ROB0156-B

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately.Use this kit to change your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws, etc. Just a simple installat...

SKU: LB-LS7860

A USB-C to Micro-USB cable for connecting Micro-USB development boards and devices to modern USB-C laptops and chargers. Ideal for programming boards like the micro:bit, Raspberry Pi Pico, Teensy 4.1, Circuit Playground Express, DFRobot Beetle, Maker UNO, and other Micro-USB devices.Specification...

SKU: AF-2133

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...

SKU: MR-MINIMUM

The Minimum Cubelet can accept any amount of data but only outputs the smallest value that it receives. It can be handy for creating an on-off switch for a robot and also for using with a Distance Cubelet to build robots that avoid falling off the edge of a table

SKU: AF-1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: DF-SEN0213

The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...

SKU: DF-FIT0495-G

A compact metal DC geared motor with a 45:1 reduction gearbox, delivering up to 1.2 kg·cm of torque. The all-metal gears provide durability and stability for robotics and mechanical projects. Features a D-shaped 4 mm output shaft. Specifications Rated Voltage – 6V DC Operating Voltage – 2–7.5...