All Products

SKU: AF-1222

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable enough to dedicate to every build. Program it over USB with the Arduino IDE and bri...

SKU: AF-1032

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object is moving!) As these sensors become more popular and easier to manufacture, the...

SKU: AF-1849

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and everything you need to build interactive sewable projects — no soldering required. ...

SKU: RB-WIFIMICRO

The RedBearLab Wi-Fi Micro is a compact development board built around the Texas Instruments CC3200, the industry's first single-chip ARM Cortex-M4 microcontroller with built-in Wi-Fi connectivity. It combines an 80 MHz application processor with a dedicated ARM-based Wi-Fi network processor, so ...

SKU: LB-LR0214-73A

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered DSP chip that does the image rendering, calculation, feature-finding and search...

SKU: AF-4064

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-862

That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or l...

SKU: DF-DFR0520

Digital potentiometer is also called "Digital Pot" in short. It is a kind of mixed signal IC, which is able to dynamically change the internal resistors through MCU like Arduino. It can be applied to applications such as LED DC dimming, linear stable voltage source, oscillator, low pass filter o...

SKU: AF-2870

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGBW LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour and white. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 32-bit colour (8-bit PWM...

SKU: AF-2871

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGBW LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour and white. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 32-bit colour (8-bit PWM...

SKU: LB-LR0065

The KnockOffDuino MEGA is a budget-friendly, fully Arduino MEGA 2560 R3-compatible development board. It features the same ATmega2560 microcontroller, pinout, and form factor as the original, making it a cost-effective option for projects, prototyping, and learning. Key Features ATmega2560 Mic...

SKU: AF-3134

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Red adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip incl...

SKU: AF-3135

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Yellow adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip i...

SKU: AF-3136

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Green adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip in...

SKU: AF-3137

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Blue adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM dimming on every individual LED — no complex wiring needed. The driver chip inc...

SKU: AF-3900

The Adafruit HalloWing M0 Express is a skull-shaped development board built around the ATSAMD21G18 processor. Featuring a 1.44" full-colour TFT display, a 3-axis accelerometer, a light sensor, a speaker driver, and Feather-compatible headers, it's designed for wearables, badges, cosplay props, an...

SKU: AF-4084

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...