All Products

SKU: AF-4232

While this may appear to be an electronic shuriken, it's actually a Multifunctional USB Digital Tester! This handy (pun intended?) tool can measure voltage, current, power, charge time, and other measurements for USB A, Micro B, and USB C! It features a colorful display that pops up when you...

SKU: EC-ARS03218S

The board is designed for beginners in Arduino, with various components available that makes you build more than 10 projects easily. You won’t have to solder or connect anything at all, just plug it in a shield and start coming up with various simple examples rather than dealing with cables, sens...

SKU: DF-SEN0335

Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. The BME280 can provide temperature and humidity compensation for CCS811 to impro...

SKU: DF-DFR1216 · MPN: DFR1216

##Introduction The Multi-function Expansion Board for UNIHIKER is an all-in-one solution designed to unlock the full potential of UNIHIKER K10 projects. It directly addresses common hurdles by integrating a powerful motor driver, a portable power supply system, and extensive I/O expansion onto a ...

SKU: LB-LS6598

Introducing the ultimate Multifunction Tool Kit for all your repair needs! This comprehensive set includes everything you need to tackle any repair project, big or small. Crafted with high-quality materials, this tool kit is built to last and designed to make your repair jobs easier and more effi...

SKU: SF-TOL-12078

These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn, but thanks to the needle tip, these probes are great f...

SKU: LB-LS1938

Unlock the versatility of your devices with the 4-in-1 iPhone Multiple USB Card Reader! This compact and efficient card reader is designed to seamlessly connect to your iPhone, Android, and USB-C devices, making it a must-have accessory for anyone on the go. Key Features: 4-in-1 Functionality:...

SKU: AF-147

These multi-size wire strippers are a versatile everyday tool for electronics work. With built-in stripping notches for 20–30 AWG wire, integrated wire cutters, plier tips, and a wire loop, they handle most common stripping and cutting tasks in a single tool. The ground blades provide clean, pre...

SKU: DF-TEL0070

A multi-protocol converter board that supports USB, TTL, RS232, and RS485 interfaces. It can convert signals between any two protocols and supports one input to multiple outputs simultaneously — for example, converting a USB signal to TTL, RS232, and RS485 at the same time. Based on the FTDI FT2...

SKU: AF-2773

Have your next project be controlled by your muscles with this pack of Muscle Sensor Surface EMG Electrodes! Pair the electrodes with the MyoWare Muscle Sensor and a microcontroller (ie. Arduino, or anything else with analog input reading ability) to create a DIY low-cost v...

SKU: SF-COM-11899

Muscle Wire is a shape memory alloy (Nitinol — nickel-titanium) that contracts when heated or when an electrical current is applied, then returns to its original length when cooled. This property makes it useful as a lightweight, silent alternative to small motors or solenoids in robotic and inte...

SKU: SF-COM-11900

A one-foot (305 mm) length of 0.012" (0.30 mm) diameter Muscle Wire — a nickel-titanium shape memory alloy (Nitinol) that contracts when heated or when electrical current is applied. The wire transitions between a weaker, low-temperature martensitic form and a stronger, high-temperature austenite...

SKU: SF-PRT-26988 · MPN: PRT-26988

This is a short piece of spring steel music wire that can be bent to the shape you need for small mechanisms, linkages, prototypes or craft builds.Each unit is supplied as an individual 6 inch length with a fine 0.025 inch outer diameter, making it useful where a slim, resilient steel wire is req...

SKU: DF-DFR0512

The MXChip Azure IoT Developer Kit is an Arduino-compatible development board designed for building cloud-connected IoT applications with Microsoft Azure. It features an STM32F412 ARM Cortex-M4F microcontroller, built-in Wi-Fi, and a rich set of on-board sensors — ready to connect to Azure IoT se...

SKU: SF-DEV-28021 · MPN: DEV-28021

Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...

SKU: JU-R-E226

The My Enemies Tears Lapel Pin is perfect for those who want to show their support for the fight against enemy happiness. This lapel pin is made of high-quality metal and features the My Enemies Tears wording on a blue bottle. It's a great way to show your support for a worthy cause.

SKU: PI-RPI-017

Proud of your Pi? Let the world know! Measuring 76mm x 53mm, this eye catching little sticker will brighten up any laptop, desktop, monitor, car bumper, coffee machine, Anglepoise lamp, or anything else you can think of!

SKU: SF-DEV-18426

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your Arduino and connect the sensors to read up to si...

SKU: SF-DEV-18386

The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away from the board; this is where the MyoWare 2.0 Cable Shield comes in. The shield inc...

SKU: SF-DEV-18425

The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a TRS-to-TRS cable, and link it to the MyoWare 2.0 Arduino Shield on your develop...