All Products

SKU: AF-3258

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything development board.This Micro-B male/female extension...

SKU: AF-4008

At first glance this appears to be an ordinary A to micro B USB cable. Plug it in to your device and power supply, and you get a colorful glitter of dozens of little LEDs embedded in the length of the cable.Can be used for data and charging.The LEDs are luminous but not too bright. Perfect for va...

SKU: AF-1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...

SKU: DF-FIT0870

A USB to DC boost converter cable that steps up 5 V from a USB power source to either 9 V or 12 V output, selectable via a built-in switch. A digital LED display shows the current output voltage. Simply plug the USB end into a power bank, USB charger, or any 5 V USB source to power 9 V or 12 V de...

SKU: LS-LS7430

Upgrade your MicroBit with our Short USB-C to Micro USB data cable, measuring at just 30cm! This durable cable is perfect for connecting your MicroBit to a computer, power bank, or other device with a USB-C port. Transfer data quickly and efficiently, whether you're updating firmware or tran...

SKU: AF-4106

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: DF-FIT0265

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on n...

SKU: AF-900

A short USB 2.0 Type-A to Type-B cable, 150 mm (6") in length. Ideal for connecting Arduino boards, programmers, and other USB-B devices to a computer in compact setups where a full-length cable is unnecessary. Key Features USB 2.0 Type-A to Type-B – Standard connector for Arduino Uno, Mega, a...

SKU: AF-5523

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into your device's charging port. Now you basically have a quick-detach microUSB conn...

SKU: SF-KIT-19518

The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA standby current, making it ideal for battery-powered motion-sensing application...

SKU: AF-1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: AF-3879

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has in...

SKU: SF-KIT-19519

The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series ...

SKU: SF-KIT-23091 · MPN: KIT-23091

Setting up a Pi Zero can mean tracking down a few specific cables and a suitable power supply, so this kit bundles the essentials in one package. It is centred around the compact Raspberry Pi Zero W, a small single-board computer suited to embedded builds and Internet of Things projects.The Pi Ze...

SKU: AF-1388

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: LB-LS1832

Create a USB powered device.  This 1 meter cable can be soldered to your project to provide 5v of power. 

SKU: EF-EF10131

An 80 cm white Micro-USB cable suitable for powering and programming the BBC micro:bit and other Micro-USB devices. The 4-core shielded cable supports both charging (up to 2A) and data transfer simultaneously. Key Features 80 cm Length – Convenient length for desk and classroom use USB-A to M...