All Products

SKU: WS-24702

The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding robotics applications requiring precise position and speed control. Controllable v...

SKU: SF-ROB-24052 · MPN: ROB-24052

Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...

SKU: AF-3096

King Arthur carried Excalibur and Thor wields Mjölnir, but the Electrical Engineer? She will always have a pair of excellent tweezers at the ready such as these Rhino SW-11 Tweezers! They are sharp, straight, and super luxurious. These  are our favorite pair of small-component-grabbing tweez...

SKU: DF-SEN0334

Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap temperature sensing components, the SHT31-F offers high reliability and long-ter...

SKU: AF-5665

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membrane, making it suitable for clean indoor environments where dust and water prote...

SKU: AF-4747

If you've got a lot of wire-stripping to do, you may want to try out an automatic stripper/cutter! They are fantastic for stripping and cutting stranded and solid-core 24 or thicker AWG wires and ribbon cables. The tool has both metric (up to ~20mm) and imperial (up to 0.75") measurements on e...

SKU: AF-642

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be...

SKU: SF-SEN-18521

The SparkFun AS6212 Digital Temperature Sensor Breakout delivers high-accuracy temperature measurements with excellent low power consumption. Using the AS6212 sensor from ams AG, it achieves ±0.2 °C accuracy across a wide range and consumes just 6 µA in normal operation. The breakout communicate...

SKU: SF-ROB-27478 · MPN: ROB-27478

A compact brushless gimbal motor with an integrated AS5048A magnetic encoder for high-resolution position feedback. The 11-pole-pair design delivers smooth, precise rotation at up to 467 RPM nominal speed, making it well suited for camera gimbals, robotics, and precision motion control. Specific...

SKU: DF-SEN0577

An industrial-grade single-line 2D pulsed Time-of-Flight (ToF) LiDAR scanner with 270° horizontal field of view and up to 25 m detection range. Compact, lightweight, and IP65-rated for both indoor and outdoor use. Features a VCSEL laser emitter for smaller laser spot size and higher point cloud ...

SKU: TB-TH1827

Designed for easy wire stripping. The alloy steel can strip all types of cable from AWG 10-24 gauge (0.13 -6.0mm), and the wire guide ensures the correct length is stripped time and time again. It incorporates a precision cutting blade for easy wire cutting. It also features quality crimping ja...

SKU: SF-TOL-10719

This is a replacement soldering tip for our Hakko FX-888 soldering iron. This is a bevel type of soldering tip. Replacing the tip is very easy - simply unscrew the shield, slip the replacement tip in, and screw the shield back on. Documents: Dimensional Drawing

SKU: AF-3846

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be...

SKU: DF-FIT0576

This is a soft thin protoboard with hole diameter of 1mm, hole spacing of 2.54mm. It can be soldered DIP and SMD components, and the thickness is only 0.4mm. The proto board can be appropriate bending in any direction (depending on the size of the proto board). In the actual application, it can ...

SKU: TB-RN3436

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and monitoring applications. Rugged ceramic construction with tinned copper leads fo...

SKU: DF-DFR0753

This 40W high power DC-DC Buck converter offers a 6~14V input voltage range and up to 5V/8A output. Featuring a small body, high conversion ratio, strong heat dissipation, and large current output, the module is compatible with all 5V main-boards, and can work as an SMD element to be directly sol...

SKU: DF-DFR0571

This is a DC-DC buck-mode power module, with input voltage range 8V~28V and fixed output voltage/current 5V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion rate and small size, easy to embed.Besides, it has steady output voltage, which can work long time without voltage...

SKU: LB-00339

This is a 5-pin female header, with extra long legs  Pins are spaced by 0.1".    

SKU: SF-SEN-08680

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head p...

SKU: DF-SEN0249

The Gravity Spear Tip pH Sensor Kit is designed for measuring the pH of semi-solid materials such as wet soil, fruit, meat, and vegetables. The stainless steel spear tip protects the glass electrode and allows the probe to be pushed directly into soft materials — something standard pH probes cann...