All Products

SKU: AF-3006

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...

SKU: AF-1785

A medium surface transducer that turns any flat surface — tables, walls, panels — into a speaker. Unlike traditional cone speakers, a voice coil wrapped around a metal rod causes vibration that transfers directly to the surface it's pressed against, producing surprisingly clear sound from the sur...

SKU: DF-DFR0119

This compact stereo amplifier module from DFRobot is based on the PAM8403 chip, delivering 3W per channel into 4Ω speakers with over 90% efficiency. It's a fully functional two-channel audio amplifier with an integrated sleep mode that can be controlled via a microcontroller. Operating from 3.6–...

SKU: LB-LS2202

This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directly to your speakers. The small form factor and 3mm mounting holes make it easy t...

SKU: DF-DFR0119-O

This compact stereo amplifier module from DFRobot features a 2.54mm pin pitch for easy breadboard and embedded use. It delivers 3W per channel with left and right stereo output, and includes a shutdown (SHDN) pin for switching between working and sleep modes. By default, the module is in working...

SKU: EC-ARS01119B

ESP-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. The development board breaks out all the module’s pins to 0....

SKU: AF-3988

The Adafruit Prop-Maker FeatherWing is an all-in-one add-on for building light sabers, cosplay props, interactive toys, and wearable effects. It combines NeoPixel LED driving, a 3W RGB LED driver, a motion-sensing accelerometer, and a Class D audio amplifier onto a single Feather-format board — e...

SKU: SF-KIT-28374 · MPN: KIT-28374

Add 16-bit stereo audio output to a Teensy project with this DIY audio adapter kit built around the PT8211 digital-to-analogue converter (DAC). It is designed as a clean, high-fidelity sound source for audio-based builds using the Teensy Audio Library.The adapter provides a true stereo, line-leve...

SKU: SF-COM-09557

The STA540 from STMicro is a 4-channel, class AB audio amplifier designed for high quality sound applications. The four independent channels makes this amplifier a great choice for a number of projects, with needs ranging from four speakers stereo (F/R) to two-speaker bridge solutions. The chi...

SKU: LB-LS6972x2

A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plug for quick connection to common audio amplifier boards. Key Features Stereo ...

SKU: AF-6251 · MPN: ADA6251

The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...

SKU: AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.

SKU: AF-3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: WS-20167

Features At A Glance The Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wide range audio sampling rate, allows headphone and speaker signal output at the ...

SKU: LB-LS6069

This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...

SKU: AF-5647

The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...

SKU: AF-2133

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...

SKU: AF-1667

This compact 7" IPS display delivers 1280×800 (720p) resolution with built-in 3W stereo speakers and multiple video inputs including HDMI, VGA, and composite (NTSC/PAL). Simply connect a 9–12V DC adapter and a video source for an instant mini monitor. The display features front-panel buttons for...

SKU: LB-LS1891

HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. 3.3V - 5V logic levels and can process multiple different formats by setting tw...

SKU: AF-5986

This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a practical choice for embedded audio projects, displays, and interactive installati...