All Products

SKU: AF-3253

The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...

SKU: AF-1434

A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible with Pi Camera v1 (5 MP), v2 (8 MP), and NoIR versions. Mini screws secure the came...

SKU: SF-PRT-14272

The Raspberry Pi Zero and Zero W use a smaller CSI port than the full-sized Raspberry Pi boards, which means standard camera cables won't fit. This 15cm adapter cable bridges the gap — one end connects to the Raspberry Pi Camera Module, the other to the Zero's smaller CSI connector — giving your ...

SKU: SF-SEN-16761

This 16 mm C-mount telephoto lens from CGL Electronics is designed for the Raspberry Pi HQ Camera Module. It produces 10 MP images in a 1" sensor format and is easily interchangeable using the thumb screw and C-CS adapter ring included with the HQ Camera Module. The telephoto focal length is wel...

SKU: AF-5657

Raspberry Pi Camera Module 3 is a compact camera from Raspberry Pi. Featuring autofocus and a 12-megapixel sensor, and supported by Raspberry Pi's Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control. Camera Module 3 Standard features a 75-degree diagon...

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: AF-3099

Snap, snap! The Camera v2 is the new official camera board released by the Raspberry Pi Foundation! The Raspberry Pi Camera Board v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 p...

SKU: PI-CAM007

This camera cable adapter converts the smaller Raspberry Pi Zero camera ribbon cable to the standard full-size CSI connector used on Raspberry Pi models A, B, 2, 3, and 4. Connect the narrow end to your Pi Zero camera module and the wider end to the CSI port on a full-size Pi. Specifications C...

SKU: SF-SEN-16760

The High Quality Camera Module is a camera sensor designed to accept CS-mount lenses and, with the supplied adapter, C-mount lenses for use with the Raspberry Pi single board computer line. It offers higher resolution (12 megapixels, compared to eight megapixels), and sensitivity (approximately 5...

SKU: RP-SC1174 · MPN: SC1174

Introducing the Raspberry Pi AI Camera—your new best friend for smart vision projects! This nifty little module is packed with a 12.3MP Sony IMX500 Intelligent Vision Sensor, giving you the tools to effortlessly create vision AI applications and neural network models. Whether you’re just getting ...

SKU: PI-CAB0305

This 200 cm flex cable is a replacement or extension cable for the Raspberry Pi Camera Module. The extra length gives you much more flexibility in positioning your camera away from the Pi — ideal for enclosures, 3D printer monitoring, security setups, or any project where the standard 15 cm cable...

SKU: LB-LS3659

Function: HDMI-compatible to CSI-2Restriction: supports up to 1080p25fpsUsage: Same as standard Raspberry Pi cameraChip: Toshiba TC358743XBG 45x30mm (the same width as PI ZERO, the same two holes) Package: HDMI-compatibleto CSI-2 adapter board *1

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: SF-PRT-26025

This is a 300mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development ...

SKU: SF-PRT-26026

This is a 500mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5mm-pitch “mini” FPC format as the Compute Module Development ...

SKU: AF-5820 · MPN: ADA5820

This 500mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video joy. Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can supp...

SKU: DF-FIT0672

A 30cm flat flex cable (FFC) extension for Raspberry Pi camera modules. The 15-pin ribbon cable connects between the Raspberry Pi's CSI port and the camera module, extending the reach for remote mounting or enclosure installations. The flexible design allows the cable to be bent and routed throu...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: AF-4377

Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch 2 which has a ton of new goodies like Pi 4 compatibility, various front-pieces for adding LEGO brick compatibility, and...

SKU: AF-1645

A 50 mm replacement flex cable for the Raspberry Pi Camera (both standard and NoIR versions) and Raspberry Pi Display. Swap out the stock 150 mm cable for a shorter length when you need a compact, tidy installation. Simply open the connector on your Raspberry Pi, remove the existing cable, and s...