All Products

SKU: SF-PRT-16891

This surface-mount 50-pin board-to-board connector with 0.5 mm pitch and double-slot male configuration is used on Alchitry FPGA boards. Soldered to the underside of a board, these connectors allow Alchitry FPGA boards to stack on one another for modular expansion. Sold as a single connector — f...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: SF-PRT-14424

Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. The shape of these connectors allows them to be used with a variety of retro game-cabinet buttons, as well as li...

SKU: DF-FIT0839 · MPN: FIT0839

This ultra-slim green LED strip is made for decorative lighting in compact electronics projects, models and robotics where ordinary LED tape is too wide. At only 2.5mm wide and 1mm thick, it can fit into narrow channels, small frames and other tight installations.The strip has 60 SMD 0805 LEDs di...

SKU: WS-29616 · MPN: 29616

Protect Your Creative Projects with the Interface Protection Adapter Board for Raspberry Pi Compute ModulesUnleash the full potential of your Raspberry Pi projects without the fear of wear and tear on your hardware! Our Interface Protection Adapter Board is an essential add-on for Raspberry Pi en...

SKU: KI-35164

The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the supply rating of a computer USB port (under 100mA). The Tri-Colour board features ...

SKU: SF-DEV-16985

The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collected and transmitted by your SparkFun MicroMod Weather Carrier Board and its proce...

SKU: SF-PRT-14407

Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. The shape of these connectors allows them to be used with a variety of retro game-cabinet buttons, as well as li...

SKU: PI-BK0102

A fun, project-based guide to learning programming on the Raspberry Pi, written for kids aged 11–15 with no experience required. Author Carrie Anne Philbin (Director of Education at the Raspberry Pi Foundation) walks you through cool projects step by step, building your skills from the very basic...

SKU: SF-DEV-16829

The SparkFun MicroMod Data Logging Board offers a highly customizable, low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out connections for I2C via a Qwiic connector or stan...

SKU: SF-DEV-17724

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and eight 4-40 screw inserts to connect an...

SKU: SF-DEV-17723

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and four 4-40 screw inserts to connect and...

SKU: SF-KIT-19935

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...

SKU: DF-DFR0481

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There ar...

SKU: EC-DTA00421N

Although the PYB Nano board is small, it contains all the features of MicroPython. It is an ideal development board for beginners to learn more about MicroPython. It can be a well cost choice for you, for the price is low, but it supports most features and functions of MicroPython. The PYB Nano h...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: AF-5997 · MPN: ADA5997

The Adafruit CH334F Mini 4-Port USB Hub Breakout converts one USB host port into four downstream ports using the CH334F USB 2.1 hub chip. Designed to be compact and embeddable, it fits inside enclosures or existing devices where a standard USB hub would be too bulky. The upstream connection can ...

SKU: DF-FIT0931 · MPN: FIT0931

##Introduction Comprised of 640 LEDs, this high-brightness flexible filament is 1200mm long and only 2mm in diameter, making it perfect for DIY lighting decoration and 360° all-angle lighting fixtures. It comes with adjustable brightness and requires a 21-24V power supply, with the positive elect...