All Products

SKU: AF-5764

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone headsets. It's also handy when you want to repurpose standard audio cables for low...

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: DF-DFR0718

This is a compact and cost-effective Bluetooth 5.0 audio receiver module that supports automatic reconnect function. It can be powered by a micro USB or 3.7V lithium battery. You can easily convert your old speakers into wireless Bluetooth speakers with this module. If you short circuit the So...

SKU: LB-LS2202

This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directly to your speakers. The small form factor and 3mm mounting holes make it easy t...

SKU: SF-DEV-14809

The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not be confused with I2C) audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the I2S standard to an analog signal and amplifies...

SKU: DF-DFR0720

This is a small size and cost-effective Bluetooth 4.2 Audio Receiver module with dual 5W power amplifier circuits. It supports auto-reconnect and can be powered by micro USB or 3.7V lithium battery. The module can be turned into a stereo Bluetooth speaker when connected with two speakers. Also, y...

SKU: SF-COM-27247 · MPN: COM-27247

A compact through-hole speaker that solders directly to your PCB. When you need better audio quality than a piezo buzzer but don't have room for a full-sized speaker, this 30mm unit hits the sweet spot – clear enough for voice prompts and alerts, small enough to fit in tight enclosures. The plas...

SKU: SF-PRT-10588

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

SKU: SF-COM-14023

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...

SKU: DF-TEL0108

This Bluetooth audio receiver module supports wireless streaming, USB flash drive, and TF (microSD) card playback. It decodes MP3, WMA, WAV, and lossless FLAC audio formats, with a built-in pre-amp output capable of driving headphones or a small 3 W speaker directly. Powered by 5 V DC via Micro-...

SKU: DF-SEN0327

A compact digital MEMS microphone module based on the MSM261S4030H0 chip, providing 24-bit I2S digital audio output. The built-in I2S interface connects directly to DSPs and microcontrollers without requiring an external codec, simplifying audio capture designs. An on-board SK9822 RGB LED provide...

SKU: LB-PT-M38

A compact Bluetooth 4.2 audio receiver module (MH-M18) that streams two-channel stereo audio wirelessly from your phone, tablet, or other Bluetooth device. Once paired, it delivers lossless audio playback with a connection range of up to 20 metres in open environments. The module supports button...

SKU: AF-1475

The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume. That's because the on-board audio is genera...

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...

SKU: DF-DFR0768

Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player! This MP3 player module supports four controlling modes: Arduino, AT command, on-board buttons, and ADKEY. You can directly press the on-board button to play or switch music without using a controller. Moreover, this player modul...

SKU: AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.

SKU: AF-4031

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack so you get left and right channels as well as a ground pin. You can use any 3.5mm stereo cable with this jack. The pins are on 0.1" spacing so it plugs very solidly (and vertically!) into ...

SKU: DF-DFR0119

This compact stereo amplifier module from DFRobot is based on the PAM8403 chip, delivering 3W per channel into 4Ω speakers with over 90% efficiency. It's a fully functional two-channel audio amplifier with an integrated sleep mode that can be controlled via a microcontroller. Operating from 3.6–...

SKU: AF-3367

The Mini USB Microphone is an ultra-compact plug-and-play USB microphone that requires no drivers. Simply plug it into any USB port and start recording immediately. Compatible with Raspberry Pi, laptops, desktops, and other single-board computers. Its tiny form factor makes it ideal for projects...

SKU: AF-861

You will squeak with delight when you hold this adorable miniature LED matrix. 0.8" square, its got everything a big LED matrix has, but bite sized! 64 bright yellow-green LEDs are contained inside the plastic body, in an 8x8 matrix. There are 16 pins on the side, 8 on each, with 0.1" spacing ...