All Products

SKU: PR-PIM580

The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a compact user interface device for readouts, menus, notifications, or generative art...

SKU: RP-SC0919 · MPN: SC0919

The Raspberry Pi Pico WH is the header-ready version of the Pico W — featuring the same RP2040 microcontroller and Infineon CYW43439 wireless chip, but with male headers pre-soldered to all through-hole pads for immediate breadboard use. The CYW43439 provides Wi-Fi (802.11 b/g/n) and Bluetooth 5...

SKU: AF-4280

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...

SKU: AF-4393

The Adafruit Mini PiTFT 1.14" is a compact 135×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. Its slim widescreen format is perfect for status bars, scrolling text, or compact dashboards on headless Pi projects. The display communicates over SPI for f...

SKU: AF-3298

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U! This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted back-to-back onto a Pi Zero. The 4 pogo pins on the back will connect the PP1, PP6, P...

SKU: WS-16562-ZERO-WH

The GamePi15 is a compact retro game console expansion designed specifically for the Raspberry Pi Zero series. Simply attach your Pi Zero to the board and you have a fully portable handheld console with built-in display, controls, speaker, and battery charging circuitry. This kit includes a Rasp...

SKU: LB-00252

The Raspberry Pi Zero extends (and shrinks) the Raspberry Pi family down to a fast little gum stick sized computer. Like the Pi Zero, it also has: 1GHz, single-core CPU 512MB RAM Mini HDMI and USB On-The-Go ports Micro USB power HAT-compatible 40-pin header Composite video and reset headers C...

SKU: LB-PICO-WH

Get started quickly with the Raspberry Pi Pico WH — a wireless-enabled microcontroller board with pre-soldered headers and a MicroUSB cable included. The Pico WH combines the RP2040 microcontroller with an Infineon CYW43439 wireless chip for Wi-Fi (802.11 b/g/n) and Bluetooth 5.2 connectivity, al...

SKU: AF-5905 · MPN: ADA5905

The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket headers — all with no soldering required when used with a Pico H or Pico WH. The do...

SKU: AF-3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, di...

SKU: AF-3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: DF-DRI0054 · MPN: DRI0054

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, stepper motors, and servos simultaneously. It also provides spare camera and DIP d...

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: WS-16865

Note: Raspberry Pi and micro SD card are NOT included.OverviewThe GamePi20 is a mini retro video game console based on Raspberry Pi Zero / Zero W / Zero WH, recalls you all the gaming pleasures in the memory.This accessory pack includes add-ons required to build your own GamePi20, excerpt for the...

SKU: EC-RPA01921N

We all know that the core system of Raspberry Pi Zero is Linux, and without NIC inconvenient. However, most of the operations are based on linux’s command line via ssh service, that’s why we introduce this product.This Raspberry Pi Zero Enc28j60 is a simple network adapter module, it’s easy to as...

SKU: WS-15154-NO-PI

This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.Game HAT Features 3.5inch IPS screen, 480×320 resolution 60 frame experience, smoothly display, no more frame loss Compatible with Raspberry Pi A+/B+/2B/3B/3B+ (Ra...

SKU: LB-BK-SPEAKER

A bulk pack of 20 breadboard-compatible speakers — a Little Bird exclusive. Each speaker comes with jumper wires and standard header pins pre-soldered, so it plugs directly into a breadboard with no extra wiring needed. Originally designed for talking greeting cards, these speakers are extremely...

SKU: AF-3446

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own classic Pi Zero case for a little while now, the Pi Foundation celebrates the release of the Pi Zero W with this impressive, well-designed effort that is d...

SKU: AF-4822

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum, and the top and bottom are soft silicone for a nice and easy-to-clean case that...