All Products

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: SF-WRL-20855

Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency Range: 810-910MHz Center Frequency: 868MHz Gain: 2dBi Ant...

SKU: SF-WRL-14876

A 1/2-wave 915MHz LoRa duck antenna with 2dBi gain and an RP-SMA connector. Designed for the 860–960MHz band, this 200mm antenna is ideal for extending the range of LoRa nodes and other sub-GHz radio modules. Specifications Frequency Range – 860–960MHz Gain – 2dBi Type – 1/2-wave dipole Con...

SKU: SF-PRT-16766

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices that integrate seamlessly with the Qwiic system. The vertical mount profile is id...

SKU: AF-4046

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! We also carry the socket 'mating' version of this cable over here....

SKU: AF-4045

This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND Red for V+ White for SDA Green for SCL Even though...

SKU: DF-FIT0720

These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with compact boards like the DFRobot Beetle or any module without pre-soldered headers...

SKU: AF-4170

A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable edge. Key Features 16 Pins (2×8) – Standard IDC ribbon cable layout 305mm (1...

SKU: SF-BOB-31206 · MPN: BOB-31206

Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connection.It is useful for projects that need smoother control signals, such as sound g...

SKU: SF-DEV-17724

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and eight 4-40 screw inserts to connect an...

SKU: SF-GPS-15005 · MPN: GPS-15005

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...

SKU: AF-1646

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 100mm long We have cables in 50mm...

SKU: SF-DEV-17723

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and four 4-40 screw inserts to connect and...

SKU: SF-GPS-17722 · MPN: GPS-17722

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...

SKU: SF-WIG-21277 · MPN: WIG-21277

Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...

SKU: AF-3237

That's one slim cellular antenna! At 238mm long from tip to tip and and with a cable thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're ma...

SKU: AF-1648

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 300mm long We have cables in 50m...

SKU: AF-3814

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST connector, but it's 100% compatible with a nice clicky connection that you can ...

SKU: AF-5056

The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory into a plug-and-play USB device — no breadboard or soldering required. The board ...

SKU: SF-BOB-18012

Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. Once added, you can use it as a hub to add as many I2C devices to the bus as you ...