All Products

SKU: AF-4447

These premium female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" female header contacts on either end and fit cleanly ne...

SKU: DF-FIT0033

A 300 mm (11.8″) servo extension cable for when your servo needs to reach further than its built-in lead allows. Male connector on one end plugs into your controller, female connector mates with the servo. Also works as a simple 0.1″ pitch jumper cable. Specifications Length – 300 mm (11.8″) ...

SKU: SF-PRT-09194

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. The slim connector housings allow multiple jumpers to be installed side by side o...

SKU: AF-4482

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" male header contacts on either end and fit cleanly next to ...

SKU: AF-1951

These premium female-to-female jumper wires are ideal for making wire harnesses or connecting between headers on PCBs. Each pack contains 20 wires in a ribbon cable format — two of each of ten rainbow colours — that can be kept together for organised harnesses or separated into individual jumpers...

SKU: SF-PRT-08431

This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be installed n...

SKU: PL-1700

A 50-piece assortment of premium stranded jumper wires with female-to-female (F-F) terminations. Each wire is 150 mm (6″) long with 26 AWG stranded conductors and 2.54 mm (0.1″) compatible connectors. The pack includes five wires in each of ten colours for easy circuit identification. Key Featur...

SKU: SF-PRT-09139

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes in five packs of twenty jumpers (colors shown). Dimensions: 155m...

SKU: AF-3146

Create custom wire harnesses with these single-row housings for DIY jumper cables. Compatible with both male and female jumper wires, these housings give you full control over your wiring layout and connector configurations. Simply snap in raw jumper wires to build custom-length, custom-pin-coun...

SKU: SF-PRT-12795

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another on a 0...

SKU: AF-3633

Our Raw Male/Female Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCBs. These premium jumpers are a little over 6", almost 8" (about 200mm) long and come in a 'strip' of 40 (5 pieces of the ten rainbow colors). The 0.75...

SKU: AF-3144

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving you near limitless options when using jumper wires in your project. This is a pack...

SKU: SF-PRT-12796

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another on a 0.1" he...

SKU: DF-FIT0334

This 300mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed conta...

SKU: SF-PRT-08430

Premium female-to-female jumper wires, 155mm (6″) long, for connecting between male headers on development boards, breakout boards, and breadboards. The 0.1″ pitch connectors fit standard pin headers and can be installed side by side. Specifications Connector Type – Female to Female (F/F) Len...

SKU: SF-PRT-12794

These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to each othe...

SKU: AF-3142

Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" raw sockets on either end...

SKU: PL-1239

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. Specifications Length: 300mm (12") Conductors: 6 Wire Gauge: 26 AWG stranded...

SKU: SF-PRT-10897

These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown). Note: The pictures for th...

SKU: DF-FIT0365

 INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a variety of colours. These jumper wires are perfect for breadboards, Arduino cre...