All Products

SKU: AF-1596

A 5.0-inch TFT display with 800×480 resolution, LED backlight, and a 4-wire resistive touchscreen overlay. The touchscreen adds user input capability for interactive interfaces, menus, and control panels. This is the touchscreen version of the 5.0" 40-pin TFT Display without Touchscreen. This is...

SKU: DF-DFR0678

This 7" TFT touchscreen connects directly to the Raspberry Pi via the DSI display interface, delivering 800×480 resolution with capacitive 5-point touch input. The display is powered entirely from the Raspberry Pi — no external power supply required. Mounting holes on the back of the screen allo...

SKU: AF-2353

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for graphics, menus, or data visualisation. This is a raw pixel-dot-clock display ...

SKU: LB-LR0120

This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...

SKU: EC-ARS36125D

A 3.5" TFT colour display shield with 320×480 resolution that plugs directly onto Arduino UNO and Mega2560 boards — no wiring required. Also compatible with Arduino Due, STM32, and other common microcontrollers. Open-source Arduino library files are available for quick development. Key Features ...

SKU: DF-DFR0847

This 0.96″ 160×80 Colour TFT Display delivers vibrant 16-bit (RGB565) colour output in an ultra-compact form factor. With an edge-to-edge design and a tiny 13.5 × 34 mm footprint, it is well suited for wearable devices, compact gadgets, and smart home interfaces. Driven by the ST7735 controller ...

SKU: DF-DFR0506

This 7" HDMI display with capacitive touchscreen supports up to 5 touch points and uses DFRobot's USB free-driver technology — simply plug in via USB for instant touch control with no driver installation required. It works like a keyboard or mouse on any compatible system. The display supports W...

SKU: LB-00015

This 7" LCD HDMI touchscreen display features 800×480 resolution with capacitive touch control. It works with Raspberry Pi, Banana Pi, and Banana Pro, and can also serve as a general-purpose HDMI monitor for any computer. HDMI provides the video connection while a USB cable supplies power and to...

SKU: AF-2454

The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full graphics acceleration and instant refresh — the same quality you'd expect from an...

SKU: E14-MP014889

A purpose-built enclosure for the Raspberry Pi 5 and official 10" touchscreen display, designed and manufactured in the UK. The black ABS housing integrates both the Pi and display into a clean, self-standing unit at a 33° angle — ready for touchscreen interaction straight out of the box. Precis...

SKU: LB-LR0120-PI4

This 5-inch HDMI TFT LCD touch screen is designed for Raspberry Pi 4, plugging directly onto the GPIO header with an HDMI connection for an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display uses HDMI ...

SKU: DF-DFR0665

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI and works with both 3.3V and 5V logic. The IPS panel provides wide viewing ang...

SKU: AF-1932

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...

SKU: AF-2807

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top' o...

SKU: EC-DIS08070H

CrowPanel ESP32 Display 7.0-inch module is a powerful HMI touch screen with 800*480 resolution LCD display. It uses the ESP32-S3-WROOM-1-N4R8 module as the main control processor, with a dual-core 32-bit LX6 microprocessor, integrated WiFi and Bluetooth wireless functions, a main frequency of up ...

SKU: AF-5793

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7...

SKU: AF-5794

This is a screen for advanced hackers who like the look of a big rectangular TFT screen with tons of pixels and a capacitive touchscreen overlay. The 4" display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction.The TFT ...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: AF-2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: AF-1680

A 5.0-inch TFT display with 800×480 resolution and LED backlight, providing a large, vibrant screen for embedded projects. This version does not include a touchscreen overlay, making it a lower-cost option when touch input is not required. This is a raw RGB TTL (parallel pixel-clock) display — i...