All Products

SKU: SF-DEV-13955

The SparkFun OpenLog with Headers is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or "log" huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, fo...

SKU: SF-WRL-20168

The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...

SKU: DF-DFR1092 · MPN: DFR1092

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...

SKU: AF-4383

The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibrant visuals with 80° viewing angles in all directions — a significant step up fr...

SKU: AF-3654

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: SF-TOL-09419

The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card into the onboard socket — all SPI signals are then broken out to an 8-pin 0.1″ pitc...

SKU: DF-DFR0664

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible with a broad range of microcontrollers including Arduino Uno, Leonardo, ESP32, E...

SKU: DF-DFR0665

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI and works with both 3.3V and 5V logic. The IPS panel provides wide viewing ang...

SKU: AF-1480

A 2.2″ TFT LCD breakout with 320 × 240 resolution and full 18-bit colour (262,144 shades), driven by an ILI9340 (or compatible) controller over 4-wire SPI. The onboard frame buffer means even low-memory microcontrollers can drive this display without issues. The breakout includes an ultra-low-dr...

SKU: AF-4311

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade over CSTN-type displays found in older LCD modules. The breakout communicates ...

SKU: AF-2088

The Adafruit 1.44" Colour TFT LCD Display Breakout is a compact 128×128 pixel screen driven by the ST7735R controller over 4-wire SPI. Unlike older CSTN displays, this is a true TFT with full 16-bit colour and fast refresh rates, making it suitable for any microcontroller project. The breakout i...

SKU: WS-29318 · MPN: 29318

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simple. An onboard voltage translator supports both 3.3 V and 5 V logic levels. Comp...

SKU: AF-3533

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SPI, making it compatible with virtually any microcontroller — even those with lim...

SKU: EC-RPA05036T

The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap between them without removing or swapping cards. The switcher can also be cont...

SKU: WS-31284 · MPN: 31282

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...

SKU: SF-COM-26322 · MPN: COM-26322

This compact USB-A reader gives you a simple way to access microSD cards from a computer. Plug the adapter into a USB-A port, insert your microSD card, and you can read from or write to the card as needed.No drivers are required, making it a handy tool for moving files, loading data, or checking ...

SKU: DF-DFR0669

A 3.5" IPS TFT LCD display module with 480×320 resolution and a 5-point capacitive touchscreen. Driven by the ILI9488 display controller and GT911 touch chip, it communicates over SPI and operates at 3.3–5.5 V, making it compatible with Arduino UNO, Leonardo, ESP32, ESP8266, and DFRobot FireBeetl...

SKU: SF-LCD-11377

The µLCD-144-G2 (GFX) is a compact 1.44" colour LCD module with an embedded GOLDELOX-GFX2 graphics processor. It delivers standalone graphics capability — draw lines, circles, text, display images, animations, and video clips — all programmable in 4DGL, a high-level graphics language with syntax ...

SKU: EC-CRF1356KIT

This RFID kit includes a 13.56M RF reader module, which use the RC522 IC, plus 2 S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz, it supports ISO 14443A/MIFARE ...

SKU: DF-DFR0928

A 1.8-inch IPS TFT LCD display module with 128×160 resolution and an integrated microSD card slot for reading full-colour bitmaps. Driven by the ST7735S chip over SPI (4-wire), the display offers a 120° viewing angle and low power consumption, making it suitable for sensor dashboards, status moni...