All Products

SKU: SF-DEV-20748 · MPN: DEV-20748

This single-board carrier lets you connect one MicroMod Processor Board to one MicroMod Function Board using SparkFun’s M.2-based MicroMod ecosystem. Align the keyed edge connector, fasten the boards with screws, and you can swap processors or functions to suit your project.The board provides USB...

SKU: SF-LCD-15143

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia files while keeping the pin count low. The breakout accepts both 5 V and 3.3 V po...

SKU: SF-PRT-00127

Do you need a lot of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. TransFlash has now completed standards certification and is now known as microSD. Compatible with the SPI interface found on any SD card, this tiny form factor was created for ...

SKU: AF-1381

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can ...

SKU: AF-5945 · MPN: ADA5945

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of view produces natural-looking images without the barrel distortion of wider len...

SKU: AF-5946 · MPN: ADA5946

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus adds a 5-megapixel camera with a 120-degree wide-angle lens and autofocus motor to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's built-in JPEG encoding to save photos to a microSD card or uplo...

SKU: AF-5948 · MPN: ADA5948

The Adafruit PiCowbell OV5640 Camera Breakout adds a 5-megapixel camera with a 120-degree low-distortion wide-angle lens to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's built-in JPEG encoding to save photos to a microSD card or upload them to the cloud...

SKU: AF-4027

The Raspberry Pi 3 Model A+ is the latest board for the minimalist Pi fan. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.3/BLE. This low-cost Pi uses the same processor as the model 3 B+, b...

SKU: AF-4814

The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...

SKU: AF-4706

Gotta say - this Pi 4 is fly.  All the cool kids are going to have it - but all the coolest kids are also going to have a big pack of super cool accessories.We've hand-selected these accessories as the perfect accompaniment to your new Raspberry Pi 4 - Model B.  It's everything you need...

SKU: PR-PIM661

A compact Pico W powered E Ink® photo frame / home dashboard / life organiser with super concentrated seven colour display and wireless connectivity. Inky Frame 4.0" features a vibrant E Ink display with 640 x 400 pixels of tightly packed seven colour goodness - that's almost as many pixels as ...

SKU: PH-106008

The HighPi Pro 5S Case for Raspberry Pi 5 continues the HighPi case line, offering ease of use, flexible configuration, and attractive design. It embraces the upgrades found on the Pi 5 board, namely its active cooler, power button, and PCIe port. Lots of space is available for HATs, such as powe...

SKU: SF-WRL-29210 · MPN: WRL-29210

This MicroMod carrier board is built around the u-blox SARA-R510AWS module and AWS IoT ExpressLink, giving your MicroMod processor a simpler path to secure AWS cloud connectivity over LTE-M. Please note that this module accepts the simplified AWS IoT ExpressLink AT command set; the regular u-blox...

SKU: SF-GPS-29888 · MPN: GPS-29888

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centimetre-level positioning, tilt compensation and dead reckoning in demanding naviga...

SKU: SF-KIT-20683

The Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source da...

SKU: SF-DEV-15421

NOT COMPATIBLE WITH THE TEENSY 4. For compatible version, see Teensy Audio Adaptor Board (Revision D)This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. The shield provides you with an easy-to-use tool to add high qualit...

SKU: AF-684

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 0.96" diagonal and contains ...

SKU: SF-DEV-19426

The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-enabled sensors — no coding required. Simply plug in a compatible sensor, power up...

SKU: AF-5786

The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging ports, this board is an excellent platform for CircuitPython, Arduino, MicroPytho...

SKU: SF-WRL-25134 · MPN: WRL-25134

Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...