All Products

SKU: SF-DEV-11364

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs ...

SKU: SF-DEV-13343

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make it more durable for wearable use, we’ve used a different style of reed switch, ...

SKU: SF-DEV-12049

The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the Arduino IDE, it runs at 3.3V and features a JST connector for a rechargeable LiP...

SKU: SF-DEV-09350

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a reduction in current. LilyPad is a wearable e-textile technology developed by Le...

SKU: SF-DEV-14011

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by L...

SKU: SF-SEN-19037

The SparkFun Qwiic dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter (TDC)...

SKU: SF-DEV-08776

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyP...

SKU: SF-DEV-11893

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery and sewing skills! With this LilyPad Simple Power, you should find no trouble in ...

SKU: SF-DEV-14012

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Le...

SKU: LB-JSTBOARD

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply copper tape on top of it.A wearable lithium polymer battery or wearable lipo also kno...

SKU: SF-DEV-08467

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that chann...

SKU: AF-5095

A screw-terminal breakout module for the Raspberry Pi Pico, designed for industrial, robotics, and prototyping applications where secure, tool-free wiring is essential. Every GPIO pin is broken out to labelled terminal blocks, making it easy to connect sensors, displays, motors, and other periphe...

SKU: SF-DEV-11008

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.LilyPad is a wearable technology developed by Leah Buechley and c...

SKU: SF-DEV-13735

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connected to one of the sew tabs on the board labeled R, G, and B.The color channels on ...

SKU: DF-DFR0050

The DFRobot XBee USB Adapter connects XBee and Bluetooth modules to your PC via mini USB for configuration, wireless data transmission, and firmware programming. It uses an FTDI232 USB-to-UART converter chip for stable, reliable serial communication. The adapter also doubles as an FTDI programme...

SKU: LB-LR0220

Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable electronics. Each module is compatible with the popular Lilypad platform, making ...

SKU: SF-DEV-08463

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. Please note: This is an inductive buzzer meaning that is will act as ...

SKU: DF-DFR0374

The Arduino LCD Keypad Shield V2 includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons. This product ensures consumer's convience especially when comp...

SKU: SF-TOL-10405

This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick fabric and felt to finer materials. Key Features E-Textile Ready – Eyes sized ...

SKU: DF-SEN0057

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. LilyPad is a wearable e-textile technology developed by Leah Bue...