All Products

SKU: AF-4721

This matching pair of 1.25 mm pitch 3-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...

SKU: AF-4720

This matching pair of 1.25 mm pitch 2-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...

SKU: AF-3563

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the HDMI adapters on each end using the flex cable...

SKU: PL-1801

These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54mm) connectors. The assortment of 6″ (15 cm) wires includes five each o...

SKU: AF-3560

A 10cm (~4″) flexible HDMI ribbon cable for building custom HDMI connections with DIY HDMI adapters. Simply clip any two compatible HDMI plug adapters onto each end of the ribbon cable to create the exact cable configuration you need. Tested at 1080p with Raspberry Pi. Note that DIY ribbon cable...

SKU: AF-4722

This matching pair of 1.25 mm pitch 4-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...

SKU: DF-FIT0689

This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulated pads on the back for reliable contact with the FPC connector. Specifications...

SKU: SF-CAB-10649

A 3-foot (approximately 90 cm) length of 10-wire ribbon cable. Useful for making clean, organised multi-conductor connections in electronics projects — ideal for connecting to IDC crimp-on connectors. Specifications Conductors – 10 wires Length – 3 feet (~90 cm) Type – Flat ribbon cable

SKU: AF-4926

A slim, reliable 1.25mm pitch cable with 6-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:1 symmetric wiring, meaning pi...

SKU: PI-CAB0906

Need to expose HDMI, Ethernet, or USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job!Each cable comes with one end in panel mount format so that you can securely fix it to a flat surface and expose a port externally. Great for...

SKU: SF-CAB-14274

This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable monitor or TV. Heck, you can hook up anything you want with it! Mini HDMI is not that common of a medium right now, but in the interest of saving space it can come in hand...

SKU: PI-CAB0903

A 50 cm panel mount HDMI extension cable for exposing an HDMI port on the outside of an enclosure or project box. One end features a panel-mount HDMI female socket with mounting holes, while the other end is a standard HDMI male connector. Specifications Connector (Panel Side) – HDMI female wi...

SKU: DF-FIT0950

This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...

SKU: SF-CAB-15796

This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 to a suitable monitor or TV. Heck, you can hook up anything you want with it! Micro HDMI is less common of a medium right now even more than its Mini HDMI sibling, but in the interest of sa...

SKU: AF-5443

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, comes in Adafruit black. CAT6 means it's great for Ethernet-based ...

SKU: AF-5365

A 30 cm cable with a standard 4-pin Molex connector, designed to tap into the 5V or 12V DC power rails of an AT or ATX power supply. Perfect for powering electronics projects directly from a desktop PSU. The connector mates with the standard hard drive/CD-ROM power cables found on ATX supplies, ...

SKU: SF-PRT-17259

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: LB-PT-JUMPER-KIT

A pack of 30 male-to-male jumper wires in three colours — 10 red (power), 10 black (ground), and 10 yellow (signal). The colour coding makes it easy to keep breadboard and prototype circuits organised and readable at a glance. Key Features Colour-Coded – Red, black, and yellow for power, groun...

SKU: PI-CAB0307

This 20 cm flat-flex cable (FFC) connects the Raspberry Pi Camera Module to the CSI port on your Raspberry Pi. A shorter cable is useful for compact builds, enclosures, and projects where the standard 15 cm cable is too long or too short. Specifications Length: 20 cm Type: FFC (flat-flex cabl...

SKU: SF-PRT-08535

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key Features 10-Pin (2×5) – Standard AVR ISP programming pinout IDC Connectors – K...